Custom Metal Stamping Parts

Flat blanks, brackets, shields, covers and formed components stamped to print — progressive, transfer and single-stage dies, all tooled and run in our own shop.

Aunov runs custom metal stamping lines for customers who need more than a catalog part. Send us a STEP or DWG file and we engineer the die, prove out the process and produce the part on press lines from 5 to 250 tonnes — with every downstream step (deburring, tapping, welding, plating-ready finishing, inspection and packing) handled inside the same factory. One supplier, one quality system, one accountable team from coil to carton.

How We Stamp

Progressive die stamping line at Aunov
Progressive Die Stamping

Coil-fed lines that move the blank through cut, form and pierce stations in one stroke — the cost-effective route for high-volume brackets, shields and contacts.

Hydraulic press shop for formed components
Transfer & Formed Parts

Deeper forms, flanges and drawn-and-restriked geometries on transfer and hydraulic presses — for parts a single progressive die cannot finish.

Blanking press cutting flat blanks
Blanking & Short Runs

Laser-cut or blanked prototypes and pilot lots before hard tooling — so your program can start without waiting for production dies.

At a glance
✓Press range — 5–250T mechanical and 250–500T hydraulic
✓Materials — stainless (301/304/316/430), SPCC/SPCE, 65Mn, aluminum 1060–6061, brass
✓Thickness — 0.3 mm to 3.0 mm coil and sheet
✓Tooling — dies designed, cut and proven in our own toolroom
✓Finishing — deburring, tapping, laser welding, plating-ready surfaces
✓Quality — CMM, vision and salt-spray inspection, PPAP-ready

Need custom stamped parts? Send your drawing – quotation within 24 hours.

Request a Quote

Custom Metal Stamping Parts