The Custom Aluminum CNC Machined Housings and Brackets is produced by Aunov Tech from aluminum, formed and finished under one roof. On the product, the stamped bracket spans the mounting points while holding the component in position. Die work, machining and CMM inspection are all in-house, keeping first-article quality through scheduled runs under one roof.
Product overview
What defines this aluminium bracket is, draw depth, wall band and the surfaces that forming cannot hold, audited against the approved sample at each production release.
Die building, pressing and machining for this aluminium bracket are all in house, so the route from print to sample stays short, and nothing about the route depends on a third party.
How it is manufactured
Production of this aluminium bracket is locked to one route: Machining starts from bar or plate and runs on CNC centres; deburring and edge blending complete the operation before inspection.
The ring mounting bracket tooling and setup record is stored against the part number, so nothing depends on someone remembering. The signed ring mounting bracket sample remains the reference and is kept with the job file.
Materials and surface finish
Everything is drawn from a fixed stock list: cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze and this aluminium bracket runs in aluminium.
Coating and polishing are matched to the end use: plating, anodising, powder coating, electrophoresis and passivation. The choice is recorded on the drawing for this aluminium bracket, so the decision never has to be made twice.
Every ring mounting bracket order keeps its trace back to the approved first article, and a reorder is a repeat rather than a new start. The signed ring mounting bracket sample remains the reference and is kept with the job file.
Quality control
An ISO 9001 certified system governs production: material traceability starts with mill certificates, the CMM measures the first article dimension by dimension, and production batches are inspected on a sampling plan. Part-specific checks apply as well: on the stamped bracket, hole positions are checked on a fixture at first article, and formed flatness is gauged each run. Where the application asks for it, torque, leak or pressure testing is added to the plan, and results travel with the batch paperwork.
Applications
The aluminium bracket is specified into industrial and appliance assemblies for customers who own the drawing and the tooling.
Drawings for this aluminium bracket are adapted across programmes, so the finish is chosen to cover the harshest of them, and the die does not have to change.
Customization and options
Options changed most often
What customers usually vary on this aluminium bracket: wall thickness bands, flange geometry, thread call-outs and the surface finish, and how the order is released – sample, pilot run or scheduled call-off.
The quotation for this aluminium bracket marks what the existing tooling can do, so the boundary between free and chargeable changes is explicit. Tooling ownership on the ring mounting bracket is documented, not assumed.
Specifications
| Item | Custom Aluminum CNC Machined Housings and Brackets |
|---|---|
| Brand | AUNOV |
| Designing | Quotation is built from the drawing: DFM notes come back with the price rather than after tooling. |
| Tooling | Our toolroom covers die design, wire-cut EDM and maintenance, so tooling lead time stays under our control, and the charge is refundable against agreed volumes. |
| Samples | Sample and first article are the same discipline here: measured, reported, then approved. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; material substitutes are proposed only with your written approval. |
| Surface finish | Finish selected from the drawing: plating, coating, anodising or passivation; finish thickness and adhesion checked on the first article. |
| Processing | Progressive die stamping, trimmed and formed in one pass; first articles verify the whole flow before the run is released. |
| Equipment | Mechanical presses 5-250 T with progressive dies; first articles and batch samples are checked on the CMM. |
| Tolerance | +/-0.05 mm on bend positions, +/-0.1 mm on blank outline; finer bands confirmed from capability data before quoting. |
| Delivery terms | Delivery is quoted to your location: FOB, CIF or DDP, by sea or air as you prefer. |
Packaging and delivery
Finish comes first when packing this aluminium bracket: interleaves, bags or trays are matched to the surface treatment, in sealed cartons on export pallets, with documents issued to your instructions.
