This Stamped U-Shaped Clamp Bracket Galvanized Steel is a U-shaped clamp bracket that wraps pipe or conduit runs, galvanized for outdoor service. Aunov Tech quotes and builds it to customer print, with die design, pressing, finishing and inspection on one floor – so a drawing change is re-sampled in one place instead of being handed to another vendor.
Product overview
For this stamped U-shaped clamp bracket, the drawing centres on the press brake + stamp geometry, recorded on the inspection report that ships with every batch.
Die work, pressing and finishing sit on the same floor, so feasibility questions are answered at the press, and the approved sample is kept as the master.
From coil to finished part
Production follows a fixed route: coil is blanked and pierced and formed in a progressive die, with in-die sensing watching critical features on every stroke.
Every u-shaped clamp bracket order keeps its trace back to the approved first article, and a reorder is a repeat rather than a new start. The approved u-shaped clamp bracket sample governs later runs, and any grade change is agreed in writing first.
Materials and finishing
Working stock covers cold-rolled and galvanized steel, HSLA grades, stainless, aluminium and copper alloys, and this stamped U-shaped clamp bracket is costed in pre-galvanized steel, 2.0 mm.
Surface treatment is picked for the duty it will see: pre-galvanized, edges passivated, chosen together with the base material at quotation, Once approved, the finish is locked and does not drift between batches.
Quality control
The u-shaped clamp bracket first article is measured on the CMM and thread gauges confirm class. For this stamped U-shaped clamp bracket the critical features are 100% gauged, and torque, salt-spray or leakage tests are arranged where the service demands them, with certificates included in the shipment file.
Typical applications
Typical installation is in vehicle, equipment and enclosure programmes in both OEM and aftermarket supply.
Customization and options
Points customers normally tailor:: material, coating, hole sizes, formed features and how the order is released, and the batch pattern – sample, pilot run or scheduled production.
The quotation marks what the existing die already covers, so there are no surprise tooling charges after approval.
Specifications
| Item | Stamped U-Shaped Clamp Bracket Galvanized Steel |
|---|---|
| Brand | AUNOV |
| Designing | Made to your 2D/3D drawings (PDF, DWG, STEP, IGS) – DFM notes come back with the quotation, and the approved print governs every later batch. |
| Tooling | Die, fixture and gauge work stays in our own toolroom, which keeps tooling cost transparent, with ownership confirmed on the quotation. |
| Samples | Pre-production samples come with a full inspection report, and any deviation is corrected at sample stage, Production starts only after your written sign-off. |
| Materials | pre-galvanized steel, 2.0 mm; mill certificate and heat-number traceability supplied with the first article. |
| Surface finish | pre-galvanized, edges passivated; alternatives quoted against the drawing. |
| Processing | press brake + stamp – a U-shaped clamp bracket that wraps pipe or conduit runs. |
| Equipment | Press park from 5 T to 500 T with in-die sensing, press brake cells and an on-site toolroom. |
| Tolerance | ±0.10 mm internal width; ±0.5° legs; critical dimensions 100% gauged. |
| Delivery terms | FOB, CIF or DDP per Incoterms 2020; T/T with deposit; price breaks tied to annual volume. |
Packaging and delivery
Parts are packed to protect the finish:, interleaves, bagging or tray packing is selected by finish type, in sealed cartons on export pallets; shipping documents follow your instructions.