This Stamped Triangular Gusset Angle Bracket is a triangular gusset bracket that braces shelf and frame corners, pierced for bolted assembly. Aunov Tech quotes and builds it to customer print, with die design, pressing, finishing and inspection on one floor – so a drawing change is re-sampled in one place instead of being handed to another vendor.
Product overview
The critical features of this stamped triangular gusset bracket are the formed envelope and its faces, recorded on the inspection report that ships with every batch.
The whole route from blank to finished part stays in house, so a drawing change is absorbed in one step, and the approved sample is kept as the master.
From coil to finished part
The route for this part is repeatable: the blank is stamped and formed in a single die sequence, and secondary forming or piercing completed on the same site.
The triangular gusset angle manufacturing record is archived together with the drawing revision that produced it. First article, drawing revision and material cert travel with each triangular gusset angle batch.
Materials and finishing
Working stock covers cold-rolled and galvanized steel, HSLA grades, stainless, aluminium and copper alloys, and this stamped triangular gusset bracket is costed in pre-galvanized steel, 2.0 mm.
Surface treatment is picked for the duty it will see: pre-galvanized, with zinc, nickel or chrome plating, powder coat, e-coat and passivation available, It is fixed on the drawing, so repeat orders never reopen the question.
Quality control
First article of the triangular gusset angle: CMM data on diameters, thread class confirmed by gauge. For this stamped triangular gusset bracket the critical features are 100% gauged, and torque, salt-spray or leakage tests are arranged where the service demands them, with certificates included in the shipment file.
Typical applications
Typical installation is in automotive, appliance and industrial equipment assemblies in both OEM and aftermarket supply.
Customization and options
What customers usually vary:: material, coating, hole sizes, formed features and how the order is released, and the batch pattern – sample, pilot run or scheduled production.
Each quote states which variations are already tooled, so new tooling is only quoted where it is genuinely required.
Specifications
| Item | Stamped Triangular Gusset Angle Bracket |
|---|---|
| Brand | AUNOV |
| Designing | Made to your 2D/3D drawings (PDF, DWG, STEP, IGS) – the die is planned around your critical features, and the approved print governs every later batch. |
| Tooling | Tooling is held under your part number, so a die can be re-cut from the original design data, and maintenance is tracked against the part number. |
| Samples | Pre-production samples come with a full inspection report, so the stamped triangular gusset bracket is proven before volume production, Later batches are gauged back to the signed sample. |
| Materials | pre-galvanized steel, 2.0 mm; mill certificate and heat-number traceability supplied with the first article. |
| Surface finish | pre-galvanized; alternatives quoted against the drawing. |
| Processing | press brake + stamp – a triangular gusset bracket that braces shelf and frame corners. |
| Equipment | Mechanical presses 5-250 T with progressive dies; secondary ops run on CNC turning centres, inspection on the CMM. |
| Tolerance | ±0.10 mm hole position; ±0.5° bend; critical dimensions 100% gauged. |
| Delivery terms | FOB as standard, with DDP offered for EU and US addresses; T/T or L/C, sea or air freight quoted to your door. |
Packaging and delivery
Packing is chosen around the coating:, interleaving, polybags or formed trays are matched to the surface, in sealed cartons on export pallets, with documents issued to your instructions.