Stamping & Forming

CAPABILITY · PRESSES

Stamping & Forming Capacity

From 5-tonne high-speed progressive lines to 500-tonne hydraulic deep draws — matched to the part, not the other way round.

PRESS LINES

Two Families of Machines, One Shop

Mechanical presses win on speed; hydraulic presses win on controlled drawing speed and depth. We run both, so the process route follows the part. Progressive dies run on 5–250 tonne mechanical lines for high-volume stamped and lightly drawn parts, while 250–500 tonne hydraulic presses pull deep, thin-wall shells that mechanical motion would tear.

Press park summary
✓Mechanical press lines — 5–250T, progressive and single-station dies, high-volume stampings
✓Hydraulic deep draw presses — 250–500T, controlled ram speed for multi-stage draws
✓Part size envelope — shells from a few millimetres up to 300 mm diameter, depth-to-diameter beyond 2:1
✓Feeding — coil feed lines with straighteners; blank loading for hydraulic draws
Hydraulic press line drawing motor housings at Aunov Tech
Hydraulic presses for deep draws and forming
Stamping press line producing frames and yokes at Aunov Tech
Press lines running progressive tooling at volume
BEYOND THE FIRST DRAW

Multi-Stage Forming Under One Roof

Complex parts move through redraw, ironing, piercing, extruding and coining stages — each staged by our own tooling group so that tolerances accumulate correctly instead of drifting between vendors. Because the die shop, the presses and the inspection lab share one floor, a dimension that is drifting is caught at the press, not at the customer’s incoming check.

Typical cycle: coil in → progressive stamp or deep draw → CNC trim → wash → heat treatment or surface treatment where specified → final inspection → export packing.

What the press shop holds
✓Tolerances — in-dial features held to ±0.02–0.05 mm depending on feature and material
✓Volumes — from engineering samples to multi-million annual volumes
✓Changeovers — quick-turn die changes with first-article approval every shift start

Continue through the capability tour: the deep drawing process, tool & die design and quality control.

Talk To Our Engineers

Send your drawing to larry@aunov.com — material advice, tooling plan and a per-piece price within 24 hours.

Request a Quote

Stamped and formed parts