Aunov Tech supplies the Custom Small Hardware Stainless Steel Aluminum Deep Drawing Parts as a aluminum or stainless steel component manufactured entirely in house. Once installed, the CNC machined part delivers the precise turned or milled geometry the assembly mounts to. The same floor forms, machines and inspects the part, keeping first-article quality through scheduled runs without re-quoting the job elsewhere.
Product overview
The specification of this stainless steel component turns on, wall thinning, concentricity and the finished mating faces, audited against the approved sample at each production release.
Die work and machining for this stainless steel component sit on the same floor, so a change of wall or hole does not restart the programme, and the approved sample is kept as the master.
How it is manufactured
This is how the stainless steel component is built: Drawing runs from flat blank to finished envelope in one controlled sequence; piercing and trimming are done in the same die line.
Every multi-fin clip bracket order keeps its trace back to the approved first article, and a reorder is a repeat rather than a new start. The approved multi-fin clip bracket sample governs later runs, and any grade change is agreed in writing first.
Materials and surface finish
Everything is drawn from a fixed stock list: cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze and this stainless steel component is costed in 304 / 316 stainless steel.
The finish is chosen for the duty it will see: zinc, nickel or chrome plating, anodising, powder coating, electrophoresis and passivation. The finish on this stainless steel component is locked to the drawing revision, so later orders match.
The multi-fin clip bracket tooling and setup record is stored against the part number, so nothing depends on someone remembering. First article, drawing revision and material cert travel with each multi-fin clip bracket batch.
Quality control
The plant is ISO 9001 certified: stock arrivals are checked against mill certificates, the first article is CMM-measured against the print, and run inspections follow an agreed sampling plan. The multi-fin clip bracket first article is CMM measured – threads gauged to class, diameters on the record. Tests for torque, leakage or pressure can be arranged when the service demands them, and the batch file carries the results.
Where the part is used
The stainless steel component is specified into industrial equipment and general assembly work in volume programmes as well as aftermarket supply.
One part number for this stainless steel component frequently serves several assemblies, so the tightest tolerance in the family sets the spec, and the die does not have to change.
Customization and options
Options changed most often
Typical decisions customers make on this stainless steel component: wall thickness bands, flange geometry, thread call-outs and the surface finish, and how the order is released – sample, pilot run or scheduled call-off.
Tooled and untooled options for this stainless steel component are listed separately, so there are no surprise tooling charges after approval. Both quantity and price break are written into the multi-fin clip bracket quotation.
Specifications
| Item | Custom Small Hardware Stainless Steel Aluminum Deep Drawing Parts |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – samples are reverse-measured into a controlled drawing; revisions are re-quoted once rather than silently absorbed. |
| Tooling | Die design and toolmaking stay in house, so the die charge appears as its own quotation line, and ownership is confirmed on the quotation. |
| Samples | Samples are issued for approval before the run, so the approved first article becomes the gauge reference, and mass production is gated on that approval. |
| Materials | Stock covers carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium and brass; special grades are sourced to the drawing when volumes justify. |
| Surface finish | Zinc, nickel or chrome plating, anodising, passivation or e-coat; the agreed finish travels with the part number. |
| Processing | Coil-fed stamping, deburred and finished to the print; in-process checks sit between stages, not only at the end. |
| Equipment | 5-250 T presses running progressive and compound dies; secondary ops run on CNC turning centres, inspection on the CMM. |
| Tolerance | +/-0.05 mm on bend positions, +/-0.1 mm on blank outline; finer bands confirmed from capability data before quoting. |
| Delivery terms | CIF or DDP, with FOB available, payment by T/T, L/C at sight or D/P; each volume tier carries its own quoted price. |
Packaging and delivery
The finish on this stainless steel component dictates how it is packed: interleaves, bags or trays are matched to the surface treatment, then sealed cartons are palletised for export, with documents and marks to your instruction.
