Produced in aluminum by Aunov Tech, the Hydroformed Pierced Aluminum Camera Housing is formed and machined on the same floor. In operation, the drawn housing shields the assembly from dust, moisture and handling while locating it in place. Die work, machining and CMM inspection are all in-house, and a design change is re-sampled in one place under one roof.
Product overview
What defines this aluminium housing is, wall thickness control, flange geometry and the sealing surface, re-checked whenever the drawing is revised.
Tooling and finishing for this aluminium housing run under one roof, so a change of wall or hole does not restart the programme, with process data archived for repeat orders.
From coil to finished part
Production of this aluminium housing is locked to one route: A welded preform is expanded in the hydroforming press; the die contour is maintained against the approved first article.
The tooling record is stored against the part number, so a repeat order starts from the same approved data.
Materials and finishing
Working stock covers carbon steel SPCC / DC01, 304 and 316 stainless, aluminium, brass and copper and this aluminium housing is costed in aluminium.
The finish is chosen for the duty it will see: zinc and nickel plating, chrome, anodising, powder coating and passivation. It is fixed on the drawing for this aluminium housing, so repeat orders never reopen the question.
The pierced dome bowl tooling and setup record is stored against the part number, so nothing depends on someone remembering. The signed pierced dome bowl sample remains the reference and is kept with the job file.
Quality control
The plant is ISO 9001 certified: stock arrivals are checked against mill certificates, first-article geometry is confirmed on the CMM, and routine sampling keeps batches aligned with the first article. Cavity depth and seal face finish of the pierced dome bowl are measured at first article. Torque, leak and pressure tests are available where the assembly needs them, and results travel with the batch paperwork.
Applications
You will find this aluminium housing inside industrial equipment and general assembly work in both OEM and aftermarket supply.
One part number for this aluminium housing frequently serves several assemblies, so wall bands and finishes are selected to cover the widest duty, and approvals carry across programmes.
Options and variations
Frequently varied options in this pierced dome bowl family
Material – carbon steel, stainless, aluminum or brass; finish – plating, anodizing or coating matched to the working environment; features – draw depths, flange and thread features, vent holes, sealed exits and finishes matched to the environment; lot size – prototypes for validation, then scheduled batches against a call-off.
Changes are quoted with their tooling impact stated explicitly, so you can see which options are free and which need new tooling.
Specifications
| Item | Hydroformed Pierced Aluminum Camera Housing |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – unusual walls, threads or tolerances are feasibility-checked first; changes are priced before they are made. |
| Tooling | Tooling is built and held under your part number, so die cost stays transparent, and the charge is refundable against agreed volumes. |
| Samples | The sample you approve becomes the gauge reference for production. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; grade and temper are confirmed in writing before tooling. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; the agreed finish travels with the part number. |
| Processing | Deep drawing from coil or blank, with in-process annealing so walls thin evenly; every stage is logged against your part number. |
| Equipment | Mechanical presses 5-250 T plus 250-500 T hydraulics, with in-line annealing, backed by CNC turning centres and a climate-controlled inspection room. |
| Tolerance | +/-0.05 mm on drawn diameters, tighter bands confirmed against the drawing; finer bands confirmed from capability data before quoting. |
| Delivery terms | FOB Ningbo or Shanghai, T/T or L/C, with D/P accepted on repeat business; sea or air freight is quoted to your door. |
Packaging and delivery
The finish on this aluminium housing dictates how it is packed: each coating gets its own packing – interleaves, bags or trays, then sealed cartons are palletised for export, with documents and marks to your instruction.
