Aunov Tech supplies the Power Window Regulator Motor Aluminum Can as a stainless steel component manufactured entirely in house. In the assembly, the window lift motor housing locates the gear train while shielding the windings from dust. Forming and machining share equipment, staff and batch records, keeping first-article quality through scheduled runs without a second supplier involved.
Product overview
What defines this aluminium can is, draw depth, wall band and the surfaces that forming cannot hold, checked by CMM at first article and by gauge in production.
The press shop and machine shop that make this aluminium can share one floor, which keeps revision loops short and samples fast, and the die record stays with your part number.
How it is manufactured
Production follows a defined route: Drawing runs from flat blank to finished envelope in one controlled sequence; threads are single-pointed or rolled and seats bored in one setup where possible.
Batch records are filed against the part number, so reorders match the samples you already approved.
Materials and finishing
The standard stock list carries SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze with aluminium specified on the drawing for this aluminium can.
The surface treatment is picked to match the service conditions: polishing, zinc / nickel / chrome plating, anodising or powder coating. It is written into the drawing for this aluminium can, so it cannot drift between batches.
Production is compared with the approved sample every run, and material certificates are kept per batch.
Quality control
Quality management is certified to ISO 9001: material traceability starts with mill certificates, a full CMM report approves the first article, and every production run is inspected against the first-article report. For the window lift motor housing, gear-bore alignment is checked at first article on a CMM, and noise-critical seats are gauged each run. Torque, leak and pressure tests are available where the assembly needs them, and the batch file carries the results.
Where the part is used
This aluminium can is used in industrial and appliance assemblies under schedules that run for years at a time.
This aluminium can is supplied to several positions in the same machine, so the tightest tolerance in the family sets the spec, and the die does not have to change.
Specifications
| Item | Power Window Regulator Motor Aluminum Can |
|---|---|
| Brand | AUNOV |
| Designing | Made to your 2D/3D drawings (PDF, DWG, STEP, IGS) – a manufacturability review comes back with the quotation; the agreed version governs every later batch. |
| Tooling | Progressive and drawing dies are designed and built in house, so die cost stays transparent, and the die remains dedicated to your part. |
| Samples | First-article samples ship with a dimensional report and material certificate, so any deviation is corrected at sample stage, and mass production is gated on that approval. |
| Materials | Aluminium 1050, 3003 and 6061; anodising-grade or chromate-grade surface supplied to suit the finish chosen. |
| Surface finish | Zinc or nickel plating for corrosion, plus powder coating or electrophoresis on housings; laser etching on request. |
| Processing | Blanking, multi-stage deep drawing with interstage annealing, trimming and piercing, coining, then finishing. |
| Equipment | Mechanical presses from 5 to 250 T, hydraulic presses 250-500 T, annealing ovens, plus CNC turning and machining centres. |
| Tolerance | +/-0.01 mm to +/-0.03 mm on controlled dimensions, with CMM reports and capability data for critical features. |
| Delivery terms | CIF or DDP, with FOB available, T/T with deposit and L/C for larger runs; price breaks tie to annual volume. |
