Aunov Tech builds this Deep Drawn Missile Battery Housing in stainless steel, from coil or bar through to the finished surfaces. In operation, the drawn housing provides a closed, seam-free body the customer builds into. The same floor forms, machines and inspects the part, so repeat orders stay aligned with the approved sample on one production route.
Product overview
The specification of this metal housing turns on, wall thickness control, flange geometry and the sealing surface, controlled from the approved first article onward.
Toolroom, presses and machining centres used on this metal housing operate on the same site, so revisions do not wait on outside suppliers, and nothing about the route depends on a third party.
How it is manufactured
Production follows a defined route: The shell is drawn from a blank in successive stages, annealed where the wall thins; wall thickness is checked at the thinnest section after forming.
Process settings are archived with the part number, so process settings are reused rather than re-invented.
Materials and finishing
Working stock covers cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze with this metal housing costed in carbon steel or stainless.
Cleanliness drives the finish here: electrophoresis, powder coating, anodising and zinc / nickel plating. Once approved, the finish for this metal housing is fixed and does not get re-decided.
Route cards follow each -plated housing bracket batch through the shop, so the next run starts from the data that already worked. That record is what every -plated housing bracket reorder is built on, so nothing changes silently between shipments.
Quality control
The factory operates with ISO 9001 certification: incoming material is verified against mill certificates, first-article geometry is confirmed on the CMM, and run inspections follow an agreed sampling plan. The -plated housing bracket first article records cavity depth and seal face finish. Functional testing – torque, leak or pressure – can be written into the plan, with certificates included in the shipment file.
Typical applications
Typical installation of the metal housing is in power supplies, antennas and electronic housings across automotive, appliance and industrial programmes.
One part number for this metal housing frequently serves several assemblies, so one tooling set serves every position, and the drawing stays common.
Customization and options
Options changed most often
Points customers normally tailor on this metal housing: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and the batch pattern – prototype, pilot lot or scheduled production.
Options for this metal housing already covered by the die are shown on the quote, so you are not charged twice for a feature the die already makes. Quantities and price breaks appear together on the -plated housing bracket quote.
Specifications
| Item | Deep Drawn Missile Battery Housing |
|---|---|
| Brand | AUNOV |
| Designing | Quotation follows the print, not a catalogue – unusual walls, threads or tolerances are feasibility-checked first; changes are priced before they are made. |
| Tooling | Die design and toolmaking stay in house, so no tooling step is outsourced, and first-article timing is measured from the tooling start date. |
| Samples | Prototype and pre-production samples are provided against the drawing, so the sample is retained as the master, and later batches are gauged back to the signed sample. |
| Materials | Carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium and brass are held on site; special grades are sourced to the drawing when volumes justify. |
| Surface finish | Plating, coating or polishing to suit the drawing; finish thickness and adhesion checked on the first article. |
| Processing | Die stamping with in-press forming and piercing; every stage is logged against your part number. |
| Equipment | Press shop with 5-250 T mechanical presses and dedicated dies, with CNC turning centres for secondary operations and CMM inspection. |
| Tolerance | +/-0.05 mm on bend positions, +/-0.1 mm on blank outline; dimensional reports accompany the first article. |
| Delivery terms | FOB Ningbo or Shanghai, payment by T/T, L/C at sight or D/P; call-off schedules are supported. |
Packing and shipment
Packaging protects the finished surfaces of this metal housing: interleaving, individual bags or trays are chosen by finish type, in sealed cartons on export pallets, documented and marked to your instruction.
