A flange ring with a rounded lip, drawn from steel in one operation. The radiused lip eliminates the sharp edge a stamped ring would leave, so gaskets seat evenly and assembly hands stay safe. We keep this tooling on the shelf for repeat OEM programs.
Function and Design
A flange ring carries one job in the assembly, and every tolerance on it exists to protect that job. Tolerances that matter are confirmed with capability data before the flange ring is quoted.
What Makes It Work
- Flange and body are one pressing, which removes a welded joint and a leak path.
- Parts ship deburred and clean, packed to arrive assembly-ready.
- Trial quantities are quoted alongside volume pricing, so you can prove the part first.
- Material: Material for the flange ring is carbon steel (SPCC / DC01 or to print); the final grade is fixed in writing at drawing review.
- Process: the flange ring is deep drawn from coil or blank, trimmed and pierced in subsequent dies, flange trimmed and pierced in-die.
- Finish: Natural as standard for the flange ring; plating or coating quoted to the drawing.
- Size: Size is taken from the customer drawing; the flange ring family range gives a starting point for quotation.
- Custom: OEM/ODM flange ring work – first articles verified before production starts.
Where It Is Used
In service you will find this part in automotive sensor and motor housings, lighting reflectors and covers, appliance and HVAC assemblies.
Our Production Advantage
Quality on drawn parts is invisible until it fails – a tear in the third batch, a rim that cuts a seal. Tears, thinning and rim condition are checked at the press, not discovered at assembly.
Ask for a flange ring quotation and the numbers come with material and tooling advice attached.