Brass and steel knurled grip components – knurls cut to a defined pitch so grip is consistent and burr-free. Brass knurls feel premium and never rust; steel knurls take the torque where strength matters.
What Makes It Work
- The knurl is cut to a defined pitch – grip without burrs, and a texture that survives handling.
- Start small: trial quantities are available before volume commitment.
- Batch-to-batch consistency comes from the verified first article and sampling.
- Material: Standard stock covers brass (H62 / H65); equivalents are feasibility-checked against your print before quoting.
- Process: turn-mill machining: the part is turned, then cross-drilled and milled to print.
- Finish: The part is finished per print – passivation, plating and coating are all run in house or by audited partners.
- Size: Size per customer drawing.
- Custom: Send the part drawing for a quotation with sample lead time and material options.
Applications
Production volumes of this part run in automation and robotics hardware, instrumentation fittings, pneumatic and hydraulic systems.
Our Production Advantage
Microns decide acceptance on the part; the eye does not. Inspection is done in a climate-controlled room, and any dimension that drifts stops the machine rather than the shipment.
Part drawing or sample in, quotation with material options and sample lead time out.