Aunov Tech supplies the Deep drawn temperature sensor housing sleeve stainless steel end closed as a stainless steel component manufactured entirely in house. In operation, the sensor housing shields the sensing element and positions it in the measured medium. Forming, machining and inspection share one floor, so the approved sample defines every later batch without re-quoting the job elsewhere.
Product overview
This stainless steel sensor is defined by, material grade, wall uniformity and thread position, checked by CMM at first article and by gauge in production.
Die building, pressing and machining for this stainless steel sensor are all in house, so feasibility questions are answered on the shop floor, and the die record stays with your part number.
How it is manufactured
This is how the stainless steel sensor is built: Blanks are drawn in stages, with interstage annealing where the wall thins; wall thickness is checked at the thinnest section after forming.
Production batches of the can are gauged back to the signed first article, not to a memory of it. Any change to the can drawing is re-approved and re-verified before production continues.
Materials and finishing
Working stock covers carbon steel SPCC / DC01, 304 and 316 stainless, aluminium, brass and copper and this stainless steel sensor runs in 304 / 316 stainless steel.
Cleanliness drives the finish here: zinc, nickel or chrome plating, anodising, powder coating, electrophoresis and passivation. Once approved, the finish for this stainless steel sensor is fixed and does not get re-decided.
Production batches of the can are gauged back to the signed first article, not to a memory of it. Any change to the can drawing is re-approved and re-verified before production continues.
Quality control
An ISO 9001 certified system governs production: certificates verify each incoming batch of material, first-article geometry is confirmed on the CMM, and run inspections follow an agreed sampling plan. The can batch record includes thread gauging and seal face inspection. Functional testing – torque, leak or pressure – can be written into the plan, and the batch file carries the results.
Typical applications
This stainless steel sensor is used in temperature sensing and control assemblies in both OEM and aftermarket supply.
One part number for this stainless steel sensor frequently serves several assemblies, so one tooling set serves every position, without a second tooling round.
Customization and options
Where designs usually differ
Options customers tend to adapt on this stainless steel sensor: material grade, wall band, flange shape, thread size and finish for the working environment, and whether the first order is a prototype, a pilot lot or a production release.
The quotation for this stainless steel sensor marks what the existing tooling can do, so the effect of a revision on price is clear up front. Tooling ownership for the can is stated on the quotation.
Specifications
| Item | Deep drawn temperature sensor housing sleeve stainless steel end closed |
|---|---|
| Brand | AUNOV |
| Designing | Driven by your drawing or a physical sample – unusual walls, threads or tolerances are feasibility-checked first; the same drawing is used for every repeat order. |
| Tooling | Tooling is built and held under your part number, so no tooling step is outsourced, and maintenance is tracked against the part number. |
| Samples | Sample lead time is quoted with the order, and the approved sample governs the run. |
| Materials | Stock runs to carbon steel, 304 / 316 stainless, aluminium and brass; material substitutes are proposed only with your written approval. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; alternatives quoted with the quotation, samples approved in writing. |
| Processing | Tube drawing with precision turning on critical diameters; first articles verify the whole flow before the run is released. |
| Equipment | Drawn-tube benches, in-line annealing and CNC turning, backed by CNC turning centres and a climate-controlled inspection room. |
| Tolerance | +/-0.05 mm on bore, wall thickness band confirmed at first article; critical dimensions carry CMM data with the shipment. |
| Delivery terms | FOB Ningbo or Shanghai, T/T or L/C, with D/P accepted on repeat business; repeat orders reuse the approved first article. |
Packing and shipment
For this stainless steel sensor, protection starts at the surface: interleaving, bagging or tray packing is matched to the surface, then cartons are sealed and palletised, with marks and documents as you specify.
