Aunov Tech manufactures the Anodized Aluminum CNC Machined Enclosure Frame in aluminum on a single production floor. In duty, the CNC machined part delivers the precise turned or milled geometry the assembly mounts to. Forming and machining share equipment, staff and batch records, so first-article dimensions hold through volume batches with no third party in the loop.
Product overview
The drawing for this aluminium enclosure fixes, wall thickness control, flange geometry and the sealing surface, controlled from the approved first article onward.
The whole route from die to finished aluminium enclosure stays in house, which keeps revision loops short and samples fast, and the same die can be re-cut from the original data.
How it is manufactured
Manufacturing runs on a controlled process path: Bar and plate are cut on CNC turning and milling centres; tight features are held in one setup so concentricity does not depend on re-chucking.
Production batches of the hose barb fitting are gauged back to the signed first article, not to a memory of it. Mill certificates are filed per heat, so hose barb fitting traceability survives a change of material batch.
Materials and finishing
Base materials in stock: cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze with this aluminium enclosure costed in aluminium.
Finish selection follows the working environment: electrophoresis, powder coating, anodising and zinc / nickel plating. Once approved, the finish for this aluminium enclosure is fixed and does not get re-decided.
Every hose barb fitting order keeps its trace back to the approved first article, and a reorder is a repeat rather than a new start. Any change to the hose barb fitting drawing is re-approved and re-verified before production continues.
Quality control
The factory operates with ISO 9001 certification: material traceability starts with mill certificates, first articles are measured on a CMM, and later batches follow the sampling plan agreed at approval. The hose barb fitting first article is measured on the CMM and thread gauges confirm class. Functional testing – torque, leak or pressure – can be written into the plan, with certificates included in the shipment file.
Applications
Typical installation of the aluminium enclosure is in industrial machinery and equipment assemblies for OEM and Tier-1 customers.
One drawing for this aluminium enclosure is commonly applied to several programmes, so the specification is set by the toughest of them, and approvals carry across programmes.
Customization and options
Options that vary most in this hose barb fitting family
The parts of the print for this aluminium enclosure that get adjusted: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and how the order is released – sample, pilot run or scheduled call-off.
The quotation for this aluminium enclosure is explicit about what the die already covers, so new tooling is only quoted where it is genuinely required. The approved revision of the hose barb fitting drawing becomes the master version.
Specifications
| Item | Anodized Aluminum CNC Machined Enclosure Frame |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – unusual walls, threads or tolerances are feasibility-checked first; the agreed version governs every later batch. |
| Tooling | Die design and toolmaking stay in house, so the die charge appears as its own quotation line, and maintenance is tracked against the part number. |
| Samples | Sample and first article are the same discipline here: measured, reported, then approved. |
| Materials | Stock runs to carbon steel, 304 / 316 stainless, aluminium and brass; the final grade is fixed with the drawing review. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; finish thickness and adhesion checked on the first article. |
| Processing | CNC turning with milling and drilling in as few setups as the geometry allows; every stage is logged against your part number. |
| Equipment | 12 CNC turning centres with automatic bar feeders; first articles and batch samples are checked on the CMM. |
| Tolerance | +/-0.02 mm general machining, tighter on flagged dimensions; dimensional reports accompany the first article. |
| Delivery terms | FOB Ningbo or Shanghai, T/T with deposit and L/C for larger runs; price breaks tie to annual volume. |
Packaging and delivery
For this aluminium enclosure, protection starts at the surface: interleaves, polybags or formed trays are selected according to the coating, in sealed cartons on export pallets, documented and marked to your instruction.
