Produced in stainless steel by Aunov Tech, the Chrome Plated Shaft and Machined Flange Components is formed and machined on the same floor. In service, the CNC machined part delivers the precise turned or milled geometry the assembly mounts to. One production floor covers forming, finishing and inspection, so repeat orders stay aligned with the approved sample on one production route.
Product overview
The critical features of this metal component are, the forming route, the tolerance band and the sealing faces, audited against the approved sample at each production release.
The whole route from die to finished metal component stays in house, so the route from print to sample stays short, with the tooling history retained in house.
How the part is produced
Production of this metal component is locked to one route: Bar stock is sawn and then machined on CNC turning and milling centres; threads are single-pointed or rolled and seats bored in one setup where possible.
Each chrome-plated pneumatic quick shipment is verified against the master sample before it leaves the shop. That record is what every chrome-plated pneumatic quick reorder is built on, so nothing changes silently between shipments.
Materials and finishing
Base materials in stock: SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze with carbon steel or stainless specified on the drawing for this metal component.
Finish selection follows the working environment: polishing, plating in zinc, nickel or chrome, anodising, powder coating, electrophoresis and passivation. Once approved, the finish for this metal component is fixed and does not get re-decided.
Production batches of the chrome-plated pneumatic quick are gauged back to the signed first article, not to a memory of it. First article, drawing revision and material cert travel with each chrome-plated pneumatic quick batch.
Quality control and inspection
Quality management is certified to ISO 9001: mill certificates cover every delivery of stock, first articles are measured on a CMM, and run inspections follow an agreed sampling plan. The chrome-plated pneumatic quick first article is CMM measured – threads gauged to class, diameters on the record. Tests for torque, leakage or pressure can be arranged when the service demands them, and the inspection report ships with each batch.
Where the part is used
The metal component sits in industrial and appliance assemblies in volume programmes as well as aftermarket supply.
This metal component is supplied to several positions in the same machine, so the tightest tolerance in the family sets the spec, and the die does not have to change.
Customization and options
What customers usually vary
The options most often changed on this metal component: material grade, coating, wall bands, flange form and end closure, and whether the programme starts as a sample or a full release.
Tooled and untooled options for this metal component are listed separately, so the cost of a change is visible before you commit. Tooling ownership for the chrome-plated pneumatic quick is stated on the quotation.
Specifications
| Item | Chrome Plated Shaft and Machined Flange Components |
|---|---|
| Brand | AUNOV |
| Designing | Quotation reflects the real drawing: tolerances, finish and features are priced as specified. |
| Tooling | Die design and toolmaking stay in house, so the die charge appears as its own quotation line, and ownership is confirmed on the quotation. |
| Samples | The sample you approve becomes the gauge reference for production. |
| Materials | Materials held include carbon steel, 304 / 316 stainless, aluminium and brass; mill certificates and heat numbers accompany the first article. |
| Surface finish | Zinc, nickel or chrome plating, anodising, passivation or e-coat; alternatives quoted with the quotation, samples approved in writing. |
| Processing | Bar-fed turning with milled features completed in the same clamping; every stage is logged against your part number. |
| Equipment | 12 CNC turning centres with automatic bar feeders, backed by CNC turning centres and a climate-controlled inspection room. |
| Tolerance | +/-0.01 mm on ground diameters, with GD&T taken from your print; capability is checked on the first article before the run continues. |
| Delivery terms | Freight is quoted to your door in FOB, CIF or DDP terms, payment by T/T or L/C. |
Packaging and delivery
The packing method protects the surfaces of this metal component: interleaving, bagging or tray packing is matched to the surface, in sealed export cartons, palletised and marked as you direct.
