Aunov Tech builds this Aluminum CNC Machined Mounting Brackets in aluminum, from coil or bar through to the finished surfaces. In the assembly, the stamped bracket spans the mounting points while holding the component in position. One production floor covers forming, finishing and inspection, so the approved sample defines every later batch with no third party in the loop.
Product overview
This aluminium bracket is defined by, the draw ratio, corner radii and the faces that must stay flat, controlled from the approved first article onward.
Forming, machining and finishing for this aluminium bracket happen on one site, so the route from print to sample stays short, with the tooling history retained in house.
How the part is produced
The process for this aluminium bracket runs in a fixed sequence: Material is sawn and then turned, milled and drilled on CNC centres; in-process gauging runs alongside the machines on longer batches.
Each black l bracket shipment is verified against the master sample before it leaves the shop. The approved black l bracket sample governs later runs, and any grade change is agreed in writing first.
Materials and surface finish
Our stock list runs to carbon steel SPCC / DC01, 304 and 316 stainless, aluminium, brass and copper and this aluminium bracket runs in aluminium.
The finish is chosen for the duty it will see: plating, anodising, powder coating, electrophoresis and passivation. It is written into the drawing for this aluminium bracket, so it cannot drift between batches.
Each black l bracket shipment is verified against the master sample before it leaves the shop. Mill certificates are filed per heat, so black l bracket traceability survives a change of material batch.
Quality control
The factory operates with ISO 9001 certification: material traceability starts with mill certificates, the CMM measures the first article dimension by dimension, and routine sampling keeps batches aligned with the first article. On the stamped bracket itself, hole positions are checked on a fixture at first article, and formed flatness is gauged each run. Tests for torque, leakage or pressure can be arranged when the service demands them, and the inspection report ships with each batch.
Where the part is used
The aluminium bracket is specified into industrial machinery and equipment assemblies for customers who buy to drawing.
The same aluminium bracket is often run in more than one assembly, so one tooling set serves every position, and no re-tooling is needed.
Customization and options
Frequently varied options in this black l bracket family
The options most often changed on this aluminium bracket: material grade, wall band, flange shape, thread size and finish for the working environment, and whether the programme starts as a sample or a full release.
Each quote for this aluminium bracket states which variations are already tooled, so the effect of a revision on price is clear up front. The black l bracket price stays valid for the period stated on the quotation.
Specifications
| Item | Aluminum CNC Machined Mounting Brackets |
|---|---|
| Brand | AUNOV |
| Designing | Send drawings, or send a sample to be measured – a manufacturability review comes back with the quotation; the agreed version governs every later batch. |
| Tooling | Progressive and drawing dies are designed and built in house, so the die charge appears as its own quotation line, and first-article timing is measured from the tooling start date. |
| Samples | The sample you approve becomes the gauge reference for production. |
| Materials | 1050 / 3003 / 5052 / 6061 aluminium, 0.5-3.0 mm stock – temper matched to the forming depth or machining route of this bracket. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; the finish is inspected with the dimensional report on the first article. |
| Processing | Coil-fed stamping, deburred and finished to the print; in-process checks sit between stages, not only at the end. |
| Equipment | Press shop with 5-250 T mechanical presses and dedicated dies; secondary ops run on CNC turning centres, inspection on the CMM. |
| Tolerance | +/-0.05 mm to +/-0.1 mm across the part; GD&T per drawing, PPAP-style reports on request. |
| Delivery terms | FOB, CIF or DDP per Incoterms 2020, payment by T/T, L/C at sight or D/P; repeat orders reuse the approved first article. |
Packaging and delivery
The packing method protects the surfaces of this aluminium bracket: interleaves, bags or trays are matched to the surface treatment, in sealed cartons on export pallets, with documents issued to your instructions.
