The Deep Drawn Aluminum Cable Can is produced by Aunov Tech from aluminum, formed and finished under one roof. On the product, the deep drawn part carries the formed geometry the assembly needs at volume. Forming, machining and inspection share one floor, so repeat orders stay aligned with the approved sample without a second supplier involved.
Product overview
This aluminium can is defined by, material grade, wall uniformity and thread position, re-checked whenever the drawing is revised.
The press shop and machine shop that make this aluminium can share one floor, which keeps the sample loop inside our own schedule, and every step is logged against the part number.
How it is manufactured
Production follows a defined route: Coil is blanked and drawn through progressive and single-stage dies; flanges and rims are formed in the same line, then trimmed to length.
Production batches of the cable can are gauged back to the signed first article, not to a memory of it. Any change to the cable can drawing is re-approved and re-verified before production continues.
Materials and finishing
Base materials in stock: carbon steel SPCC / DC01, 304 and 316 stainless, aluminium, brass and copper and the grade agreed for this aluminium can is aluminium.
The surface treatment is picked to match the service conditions: polishing, zinc / nickel / chrome plating, anodising or powder coating. The finish on this aluminium can is locked to the drawing revision, so later orders match.
Production batches of the cable can are gauged back to the signed first article, not to a memory of it. Process settings for the cable can are archived, so later runs can be compared with the one you approved.
Quality control
An ISO 9001 certified system governs production: mill certificates cover every delivery of stock, the CMM measures the first article dimension by dimension, and run inspections follow an agreed sampling plan. The cable can first article is CMM measured – threads gauged to class, diameters on the record. Where the application asks for it, torque, leak or pressure testing is added to the plan, and results travel with the batch paperwork.
Typical applications
Typical installation of the aluminium can is in industrial machinery and equipment assemblies under schedules that run for years at a time.
One drawing for this aluminium can is commonly applied to several programmes, so a single grade and coating can cover each application, and cost per piece stays at the volume tier.
Options and variations
The options customers tune most
Typical customer decisions: material and coating for the duty, wall bands, flange forms, threads and bosses, closed ends and finishes matched to the working environment, and whether orders run as prototypes, pilot lots or scheduled batches.
Changes are quoted with their tooling impact stated explicitly, keeping the trade-offs visible from the start.
Specifications
| Item | Deep Drawn Aluminum Cable Can |
|---|---|
| Brand | AUNOV |
| Designing | Driven by your drawing or a physical sample – DFM notes are returned before any tooling is cut; revisions are re-quoted once rather than silently absorbed. |
| Tooling | Die design and toolmaking stay in house, so a die can be re-cut against the approved drawing, and the die remains dedicated to your part. |
| Samples | Sample parts are measured and reported before submission, so any deviation is corrected at sample stage. |
| Materials | 1050 / 3003 / 5052 / 6061 aluminium, 0.5-3.0 mm stock – temper matched to the forming depth or machining route of this can. |
| Surface finish | Plating, coating or polishing to suit the drawing; alternatives quoted with the quotation, samples approved in writing. |
| Processing | Deep drawing from coil or blank, with in-process annealing so walls thin evenly; in-process checks sit between stages, not only at the end. |
| Equipment | Mechanical presses from 5 to 250 T and hydraulic presses 250-500 T, with in-line annealing furnaces; secondary ops run on CNC turning centres, inspection on the CMM. |
| Tolerance | +/-0.05 mm on flange and rim dimensions, wall controlled by the draw; capability is checked on the first article before the run continues. |
| Delivery terms | Standard terms FOB; DDP available for EU and US, with T/T and L/C accepted. |
Packing and shipment
The finish on this aluminium can dictates how it is packed: interleaves, bags or trays are matched to the surface treatment, in sealed export cartons, palletised and marked as you direct.
