Aunov Tech manufactures the 6X50mm One End Closed temperature sensor deep drawing stainless steel in stainless steel on a single production floor. In operation, the sensor housing carries the active element while passing the signal through a sealed exit. Die work, machining and CMM inspection are all in-house, which keeps tolerances consistent from sample to volume without re-quoting the job elsewhere.
Product overview
The drawing for this stainless steel sensor fixes, the draw ratio, corner radii and the faces that must stay flat, checked by CMM at first article and by gauge in production.
Forming, machining and finishing for this stainless steel sensor happen on one site, so feasibility questions are answered on the shop floor, and the die record stays with your part number.
How it is manufactured
Manufacturing runs on a controlled process path: Coil is blanked and drawn through progressive and single-stage dies; wall thickness is checked at the thinnest section after forming.
Repeat plain round sensor orders are measured against the approved sample, so neither material nor finish drifts between lots. The approved plain round sensor sample governs later runs, and any grade change is agreed in writing first.
Materials and finishing
Base materials in stock: cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze with 304 / 316 stainless steel specified on the drawing for this stainless steel sensor.
The finish is chosen for a clean working surface: zinc, nickel or chrome plating, anodising, powder coating, electrophoresis and passivation. It is written into the drawing for this stainless steel sensor, so it cannot drift between batches.
Repeat plain round sensor orders are measured against the approved sample, so neither material nor finish drifts between lots. The approved plain round sensor sample governs later runs, and any grade change is agreed in writing first.
Quality control
An ISO 9001 certified system governs production: material traceability starts with mill certificates, a full CMM report approves the first article, and later batches follow the sampling plan agreed at approval. Each plain round sensor batch is checked for thread class and seal face condition. Tests for torque, leakage or pressure can be arranged when the service demands them, with certificates included in the shipment file.
Applications
Typical installation of the stainless steel sensor is in temperature sensing and control assemblies for customers who own the drawing and the tooling.
One part number for this stainless steel sensor frequently serves several assemblies, so wall bands and finishes are selected to cover the widest duty, without a second tooling round.
Customization and options
Where designs usually differ
Typical decisions customers make on this stainless steel sensor: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and whether the programme starts as a sample or a full release.
Tooled and untooled options for this stainless steel sensor are listed separately, so the boundary between free and chargeable changes is explicit. Both quantity and price break are written into the plain round sensor quotation.
Specifications
| Item | 6X50mm One End Closed temperature sensor deep drawing stainless steel |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – a manufacturability review comes back with the quotation; revisions are re-quoted once rather than silently absorbed. |
| Tooling | Our toolroom covers die design, wire-cut EDM and maintenance, so no tooling step is outsourced, and ownership is confirmed on the quotation. |
| Samples | Samples are issued for approval before the run, so the approved first article becomes the gauge reference, and the signed sample is kept for future reorders. |
| Materials | Stainless 304 and 316L, pickled and annealed, 50 mm nominal wall – one grade chosen for corrosion duty and formability of this sensor. |
| Surface finish | Plating, powder coating, anodising or polishing, per the print; alternatives quoted with the quotation, samples approved in writing. |
| Processing | Deep drawing followed by CNC finishing on critical faces; first articles verify the whole flow before the run is released. |
| Equipment | Hydraulic presses for drawing, with CNC turning for finishing; secondary ops run on CNC turning centres, inspection on the CMM. |
| Tolerance | +/-0.03 mm on stepped bores, concentricity per print; GD&T per drawing, PPAP-style reports on request. |
| Delivery terms | FOB, with DDP offered for EU and US addresses, payment by T/T, L/C at sight or D/P; repeat orders reuse the approved first article. |
Packaging and delivery
The finish on this stainless steel sensor dictates how it is packed: the coating decides whether parts are interleaved, bagged or tray-packed, in sealed cartons on export pallets, with documents issued to your instructions.
