This Nickel Plated CNC Turned Fittings and Caps is an Aunov Tech production part in stainless steel, quoted and built to customer print. In duty, the CNC machined part delivers the precise turned or milled geometry the assembly mounts to. The same floor forms, machines and inspects the part, so the approved sample defines every later batch with no third party in the loop.
Product overview
The critical features of this nickel-plated steel fitting are, the forming route, the tolerance band and the sealing faces, audited against the approved sample at each production release.
Die building, pressing and machining for this nickel-plated steel fitting are all in house, so the route from print to sample stays short, with process data archived for repeat orders.
How the part is produced
Production follows a defined route: Material is sawn and then turned, milled and drilled on CNC centres; deburring and edge blending complete the operation before inspection.
The brackets, arm manufacturing record is archived together with the drawing revision that produced it. Deviations on the brackets, arm are reported before shipment rather than found on your assembly line.
Materials and surface finish
Our stock list runs to cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze with nickel-plated steel specified on the drawing for this nickel-plated steel fitting.
Finish selection follows the working environment: polishing, plating in zinc, nickel or chrome, anodising, powder coating, electrophoresis and passivation. It is written into the drawing for this nickel-plated steel fitting, so it cannot drift between batches.
Dimensional reports, material certificates and PPAP levels are available on request.
Quality control
Production runs under an ISO 9001 certified quality system: incoming material is verified against mill certificates, a full CMM report approves the first article, and every production run is inspected against the first-article report. CMM first-article measurement of the brackets, arm covers diameters and gauges thread class. Functional testing – torque, leak or pressure – can be written into the plan, and the report is packed with the shipment.
Applications
This nickel-plated steel fitting is used in industrial machinery and equipment assemblies in volume programmes as well as aftermarket supply.
The same nickel-plated steel fitting is used across several platforms, so the finish is chosen to cover the harshest of them, and no re-tooling is needed.
Customization and options
Frequently varied options
What customers usually vary on this nickel-plated steel fitting: grade and finish for the environment, wall thickness bands, flange and rim forms, threads, bosses and closed ends, and whether orders run as prototypes, pilot lots or scheduled batches.
The quotation for this nickel-plated steel fitting is explicit about what the die already covers, so new tooling is only quoted where it is genuinely required. The same split appears on every brackets, arm reorder.
Specifications
| Item | Nickel Plated CNC Turned Fittings and Caps |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – a manufacturability review comes back with the quotation; the agreed version governs every later batch. |
| Tooling | Die design and toolmaking stay in house, so die cost stays transparent, and the charge is refundable against agreed volumes. |
| Samples | Prototype and pre-production samples are provided against the drawing, so the sample is retained as the master, and later batches are gauged back to the signed sample. |
| Materials | Nickel 200 / 201 and nickel-plated steel, 0.8-4.0 mm; selected where conductivity and oxidation resistance both matter. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; alternatives quoted with the quotation, samples approved in writing. |
| Processing | Die stamping with in-press forming and piercing; every stage is logged against your part number. |
| Equipment | Press shop with 5-250 T mechanical presses and dedicated dies, backed by CNC turning centres and a climate-controlled inspection room. |
| Tolerance | +/-0.05 mm on bend positions, +/-0.1 mm on blank outline; dimensional reports accompany the first article. |
| Delivery terms | FOB, CIF or DDP per Incoterms – payment by T/T or L/C, with shipping quoted door-to-door. |
Packaging and delivery
Packaging protects the finished surfaces of this nickel-plated steel fitting: each coating gets its own packing – interleaves, bags or trays, in sealed cartons on export pallets; shipping documents and carton marks follow your instructions.
