Aunov Tech supplies the Custom End Closed Welding Stainless Steel Temperature Sensor Probe as a stainless steel component manufactured entirely in house. In operation, the sensor housing carries the active element while passing the signal through a sealed exit. Forming and machining share equipment, staff and batch records, so the approved sample defines every later batch without re-quoting the job elsewhere.
Product overview
This stainless steel sensor is defined by, material grade, wall uniformity and thread position, re-checked whenever the drawing is revised.
Toolroom, presses and machining centres used on this stainless steel sensor operate on the same site, so a drawing change is absorbed in one step, and the die record stays with your part number.
From coil to finished part
Manufacturing runs on a controlled process path: Parts are assembled in welding fixtures and the welds are dressed; fixtures keep position consistent between batches.
Repeat channel mounting bracket orders are measured against the approved sample, so neither material nor finish drifts between lots. Mill certificates are filed per heat, so channel mounting bracket traceability survives a change of material batch.
Materials and finishing
Everything is drawn from a fixed stock list: SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze and this stainless steel sensor is costed in 304 / 316 stainless steel.
The finish is chosen for a clean working surface: electrophoresis, powder coating, anodising and zinc / nickel plating. The agreed finish for this stainless steel sensor travels with the part number on every reorder.
Each channel mounting bracket shipment is verified against the master sample before it leaves the shop. Mill certificates are filed per heat, so channel mounting bracket traceability survives a change of material batch.
Quality control
The plant is ISO 9001 certified: incoming material is verified against mill certificates, first articles are measured on a CMM, and routine sampling keeps batches aligned with the first article. Each channel mounting bracket batch is checked for thread class and seal face condition. If the assembly calls for torque, leak or pressure proof, the test is built into the quality plan, with certificates included in the shipment file.
Typical applications
This stainless steel sensor is used in sensor and thermostat assemblies for customers who own the drawing and the tooling.
One part number for this stainless steel sensor frequently serves several assemblies, so the specification is set by the toughest of them, and the die does not have to change.
Customization and options
What customers usually vary
Options customers tend to adapt on this stainless steel sensor: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and whether the programme starts as a sample or a full release.
The quotation for this stainless steel sensor is explicit about what the die already covers, so the boundary between free and chargeable changes is explicit. The channel mounting bracket quotation states the tooling ownership term explicitly.
Specifications
| Item | Custom End Closed Welding Stainless Steel Temperature Sensor Probe |
|---|---|
| Brand | AUNOV |
| Designing | Design intent is read from the print, and any conflict in the drawing is raised before quoting. |
| Tooling | Dies, fixtures and gauges are made in our own toolroom, so a die can be re-cut against the approved drawing, and first-article timing is measured from the tooling start date. |
| Samples | Prototype and pre-production samples are provided against the drawing, so the sample is retained as the master, and production starts only after your written sign-off. |
| Materials | Materials held include carbon steel, 304 / 316 stainless, aluminium and brass; grade and temper are confirmed in writing before tooling. |
| Surface finish | Natural, plated or coated – the print decides, and the agreed finish is logged; finish thickness and adhesion checked on the first article. |
| Processing | Laser or TIG welding of formed components, dressing and leak testing, then finishing. |
| Equipment | Press shop with 5-250 T mechanical presses and dedicated dies, backed by CNC turning centres and a climate-controlled inspection room. |
| Tolerance | +/-0.05 mm on bend positions, +/-0.1 mm on blank outline; dimensional reports accompany the first article. |
| Delivery terms | Delivery quoted per Incoterms 2020 – FOB, CIF or DDP – by sea or air, to your address. |
Packaging and delivery
Packing for this stainless steel sensor is chosen around the coating: interleaving, individual bags or trays are chosen by finish type, in sealed export cartons, palletised and marked as you direct.
