The Stainless Steel Machined Compression Connector is produced by Aunov Tech from stainless steel, formed and finished under one roof. Once installed, the CNC machined part provides the finished surfaces, threads and seats the mating parts locate on. One production floor covers forming, finishing and inspection, and a design change is re-sampled in one place without a second supplier involved.
Product overview
The specification of this stainless steel component turns on, the forming route, the tolerance band and the sealing faces, audited against the approved sample at each production release.
Toolroom, presses and machining centres used on this stainless steel component operate on the same site, so feasibility questions are answered on the shop floor, with process data archived for repeat orders.
From coil to finished part
Manufacturing runs on a controlled process path: Machining starts from bar or plate and runs on CNC centres; in-process gauging runs alongside the machines on longer batches.
Each shipment is traceable to the signed first article, so a repeat order starts from the same approved data.
Materials and surface finish
Working stock covers cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze and this stainless steel component is costed in 304 / 316 stainless steel.
With the working face exposed, the finish is selected for cleanliness: zinc, nickel or chrome plating, anodising, powder coating, electrophoresis and passivation. It is fixed on the drawing for this stainless steel component, so repeat orders never reopen the question.
The discs, washer manufacturing record is archived together with the drawing revision that produced it. Process settings for the discs, washer are archived, so later runs can be compared with the one you approved.
Quality control
Quality management is certified to ISO 9001: stock arrivals are checked against mill certificates, first-article geometry is confirmed on the CMM, and every production run is inspected against the first-article report. First-article inspection of the discs, washer runs on the CMM: thread classes gauged, diameters logged. Tests for torque, leakage or pressure can be arranged when the service demands them, and results travel with the batch paperwork.
Applications
The stainless steel component is specified into power supplies, antennas and electronic housings in both OEM and aftermarket supply.
The same stainless steel component is often run in more than one assembly, so the finish is chosen to cover the harshest of them, and no re-tooling is needed.
Options and variations
Options changed most often
Material – carbon steel, stainless, aluminum or brass; finish – plating, anodizing or coating matched to the working environment; features – thread classes, seat finishes, milled features, cross-holes and plating or anodizing to the print; lot size – prototypes for validation, then scheduled batches against a call-off.
Every change is quoted with its tooling consequence shown, so nothing hidden appears later in the project.
Specifications
| Item | Stainless Steel Machined Compression Connector |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – samples are reverse-measured into a controlled drawing; revisions are re-quoted once rather than silently absorbed. |
| Tooling | Tooling is built and held under your part number, so tooling lead time stays under our control, and ownership is confirmed on the quotation. |
| Samples | First-article samples ship with a dimensional report and material certificate, so any deviation is corrected at sample stage, and mass production is gated on that approval. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; grade and temper are confirmed in writing before tooling. |
| Surface finish | Finish selected from the drawing: plating, coating, anodising or passivation; the finish is inspected with the dimensional report on the first article. |
| Processing | CNC turning from bar or billet, concentricity held across operations; batch records are filed so a repeat order starts from approved data. |
| Equipment | Bar-fed CNC turning centres plus 3- and 4-axis machining centres; first articles and batch samples are checked on the CMM. |
| Tolerance | +/-0.02 mm general machining, tighter on flagged dimensions; dimensional reports accompany the first article. |
| Delivery terms | FOB, with DDP offered for EU and US addresses, payment by T/T or L/C, quoted in USD or EUR; repeat orders reuse the approved first article. |
Packaging and delivery
The finish on this stainless steel component dictates how it is packed: interleaves, polybags or formed trays are selected according to the coating, in sealed export cartons, palletised and marked as you direct.
