Produced in stainless steel by Aunov Tech, the Temperature Sensor Housing is formed and machined on the same floor. In duty, the sensor housing shields the sensing element and positions it in the measured medium. The same floor forms, machines and inspects the part, so repeat orders stay aligned with the approved sample without handing the part to another vendor.
Product overview
The drawing for this metal sensor fixes, material grade, wall uniformity and thread position, recorded on the inspection report for every batch.
Die work and machining for this metal sensor sit on the same floor, so revisions do not wait on outside suppliers, with the tooling history retained in house.
How the part is produced
This is how the metal sensor is built: Blanks are drawn in stages, with interstage annealing where the wall thins; piercing and trimming are done in the same die line.
Repeat -plated closed cylinder orders are measured against the approved sample, so neither material nor finish drifts between lots. First article, drawing revision and material cert travel with each -plated closed cylinder batch.
Materials and finishing
Base materials in stock: cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze with this metal sensor costed in carbon steel or stainless.
With the working face exposed, the finish is selected for cleanliness: polishing, plating in zinc, nickel or chrome, anodising, powder coating, electrophoresis and passivation. Once approved, the finish for this metal sensor is fixed and does not get re-decided.
The approved sample governs later runs, so the colour and grain of the finish stay stable.
Quality control
Production runs under an ISO 9001 certified quality system: incoming material is verified against mill certificates, the CMM measures the first article dimension by dimension, and later batches follow the sampling plan agreed at approval. The -plated closed cylinder batch record includes thread gauging and seal face inspection. Torque, leak and pressure tests are available where the assembly needs them, with certificates included in the shipment file.
Where the part is used
The metal sensor is fitted into sensor and thermostat assemblies in volume programmes as well as aftermarket supply.
A single design of this metal sensor is often reused across a product family, so the finish is chosen to cover the harshest of them, and approvals carry across programmes.
Customization and options
Options buyers most often change on this -plated closed cylinder
What customers usually vary on this metal sensor: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and how the order is released – sample, pilot run or scheduled call-off.
Quotes for this metal sensor show which options the current die already supports, so there are no surprise tooling charges after approval. The quotation for the -plated closed cylinder states both quantities and price breaks.
Specifications
| Item | Temperature Sensor Housing |
|---|---|
| Brand | AUNOV |
| Designing | Made to your 2D/3D drawings (PDF, DWG, STEP, IGS) – samples are reverse-measured into a controlled drawing; revisions are re-quoted once rather than silently absorbed. |
| Tooling | Die design and toolmaking stay in house, so no tooling step is outsourced, and the die remains dedicated to your part. |
| Samples | First-article samples ship with a dimensional report and material certificate. |
| Materials | Materials held include carbon steel, 304 / 316 stainless, aluminium and brass; material substitutes are proposed only with your written approval. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; finish thickness and adhesion checked on the first article. |
| Processing | Deep drawing on hydraulic presses, CNC-finished where tolerances tighten; in-process checks sit between stages, not only at the end. |
| Equipment | Deep drawing presses plus CNC turning centres for machined faces, with in-house toolmaking to keep dies and fixtures maintained. |
| Tolerance | +/-0.01 mm on thread pitch diameters, +/-0.05 mm on drawn body; capability is checked on the first article before the run continues. |
| Delivery terms | CIF or DDP, with FOB available, payment by T/T, L/C at sight or D/P; repeat orders reuse the approved first article. |
Packaging and delivery
The finish on this metal sensor dictates how it is packed: interleaving, bagging or tray packing is matched to the surface, in sealed cartons on export pallets, with documents issued to your instructions.
