This Temperature sensor housing with flange is an Aunov Tech production part in stainless steel, quoted and built to customer print. In duty, the sensor housing carries the active element while passing the signal through a sealed exit. Drawing, cutting and measurement sit on one floor, which keeps tolerances consistent from sample to volume without re-quoting the job elsewhere.
Product overview
The critical features of this metal sensor are, the draw ratio, corner radii and the faces that must stay flat, controlled from the approved first article onward.
Tooling and finishing for this metal sensor run under one roof, which keeps revision loops short and samples fast, with process data archived for repeat orders.
How it is manufactured
This is how the metal sensor is built: The shell starts as coil or blank and is drawn through single and progressive dies; piercing and trimming are done in the same die line.
Each tall sensor can shipment is verified against the master sample before it leaves the shop. The signed tall sensor can sample remains the reference and is kept with the job file.
Materials and finishing
Standard stock includes carbon steel SPCC / DC01, 304 and 316 stainless, aluminium, brass and copper and this metal sensor is costed in carbon steel or stainless.
With the working face exposed, the finish is selected for cleanliness: zinc, nickel or chrome plating, anodising, powder coating, electrophoresis and passivation. Once approved, the finish for this metal sensor is fixed and does not get re-decided.
Repeat tall sensor can orders are measured against the approved sample, so neither material nor finish drifts between lots. First article, drawing revision and material cert travel with each tall sensor can batch.
Quality control
The factory operates with ISO 9001 certification: mill certificates cover every delivery of stock, first-article geometry is confirmed on the CMM, and later batches follow the sampling plan agreed at approval. Thread class and sealing faces of the tall sensor can are verified on every run. Functional testing – torque, leak or pressure – can be written into the plan, and the report is packed with the shipment.
Typical applications
The metal sensor is specified into temperature sensing and control assemblies in volume programmes as well as aftermarket supply.
A single design of this metal sensor is often reused across a product family, so wall bands and finishes are selected to cover the widest duty, and the same first article applies throughout.
Customization and options
Frequently varied options
Options customers tend to adapt on this metal sensor: grade and finish for the environment, wall thickness bands, flange and rim forms, threads, bosses and closed ends, and whether the first order is a prototype, a pilot lot or a production release.
The quote for this metal sensor separates tooled options from new work, so you can see which options are free and which need new tooling. The tall sensor can quotation carries a validity period and the price is held to it.
Specifications
| Item | Temperature sensor housing with flange |
|---|---|
| Brand | AUNOV |
| Designing | Quotation follows the print, not a catalogue – samples are reverse-measured into a controlled drawing; the approved drawing is kept as the controlled master. |
| Tooling | Our toolroom covers die design, wire-cut EDM and maintenance, so tooling lead time stays under our control, and the die remains dedicated to your part. |
| Samples | Free samples are available on standard items, with reports attached. |
| Materials | Materials held include carbon steel, 304 / 316 stainless, aluminium and brass; the final grade is fixed with the drawing review. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; the finish is inspected with the dimensional report on the first article. |
| Processing | Blanking, drawing and piercing in sequence, then machining of sealing faces; every stage is logged against your part number. |
| Equipment | Deep drawing presses plus CNC turning centres for machined faces, with CNC turning centres for secondary operations and CMM inspection. |
| Tolerance | +/-0.01 mm on turned or milled features, +/-0.03 mm on formed details; critical dimensions carry CMM data with the shipment. |
| Delivery terms | FOB with DDP offered for EU and US addresses; payment T/T or L/C, freight quoted to destination. |
Packaging and delivery
For this metal sensor, protection starts at the surface: the coating decides whether parts are interleaved, bagged or tray-packed, in sealed export cartons, palletised and marked as you direct.
