This Sensor Housing CNC Machining Stainless Steel Aluminum IP67 Rated is an Aunov Tech production part in aluminum or stainless steel, quoted and built to customer print. In operation, the sensor housing protects the electronics from vibration, fluid and electromagnetic noise. Drawing, cutting and measurement sit on one floor, so first-article dimensions hold through volume batches with no third party in the loop.
Product overview
The critical features of this stainless steel sensor are, wall thinning, concentricity and the finished mating faces, checked by CMM at first article and by gauge in production.
The whole route from die to finished stainless steel sensor stays in house, so a drawing change is absorbed in one step, with the tooling history retained in house.
How it is manufactured
This is how the stainless steel sensor is built: Material is sawn and then turned, milled and drilled on CNC centres; tight features are held in one setup so concentricity does not depend on re-chucking.
Batch records for the blue stepped barb are filed against the part number, so process settings are reused instead of re-invented. That record is what every blue stepped barb reorder is built on, so nothing changes silently between shipments.
Materials and finishing
Working stock covers SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze with this stainless steel sensor costed in 304 / 316 stainless steel.
Cleanliness drives the finish here: zinc, nickel or chrome plating, anodising, powder coating, electrophoresis and passivation. The agreed finish for this stainless steel sensor travels with the part number on every reorder.
Batch records for the blue stepped barb are filed against the part number, so process settings are reused instead of re-invented. Process settings for the blue stepped barb are archived, so later runs can be compared with the one you approved.
Quality control
An ISO 9001 certified system governs production: certificates verify each incoming batch of material, first articles are measured on a CMM, and every production run is inspected against the first-article report. Each blue stepped barb batch is checked for thread class and seal face condition. Tests for torque, leakage or pressure can be arranged when the service demands them, and results travel with the batch paperwork.
Applications
This stainless steel sensor normally works inside temperature sensing and control assemblies for customers who buy to drawing.
The same stainless steel sensor is used across several platforms, so a single grade and coating can cover each application, and cost per piece stays at the volume tier.
Options and variations
The options customers tune most
The usual variables are material and finish for the service environment, thread classes, hex or flange mounting, sealed cable exits, vent holes and finishes matched to the measured medium, and volume – from validation prototypes to scheduled call-off batches.
Quotes show which options the current die already supports, making the cost of each choice clear before you commit.
Specifications
| Item | Sensor Housing CNC Machining Stainless Steel Aluminum IP67 Rated |
|---|---|
| Brand | AUNOV |
| Designing | Driven by your drawing or a physical sample – unusual walls, threads or tolerances are feasibility-checked first; the agreed version governs every later batch. |
| Tooling | Die design and toolmaking stay in house, so die cost stays transparent, and the charge is refundable against agreed volumes. |
| Samples | Sample approval is documented: dimensions, finish and material recorded for later comparison. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; special grades are sourced to the drawing when volumes justify. |
| Surface finish | Zinc, nickel or chrome plating, anodising, passivation or e-coat; masking and laser marking available where needed. |
| Processing | Blanking, drawing and piercing in sequence, then machining of sealing faces; every stage is logged against your part number. |
| Equipment | Hydraulic presses for drawing, with CNC turning for finishing; secondary ops run on CNC turning centres, inspection on the CMM. |
| Tolerance | +/-0.01 mm on thread pitch diameters, +/-0.05 mm on drawn body; GD&T per drawing, PPAP-style reports on request. |
| Delivery terms | FOB, with DDP offered for EU and US addresses, T/T with deposit and L/C for larger runs; call-off schedules are supported. |
Packaging and delivery
The finish on this stainless steel sensor dictates how it is packed: interleaves, bags or trays are matched to the surface treatment, in sealed cartons on export pallets; shipping documents and carton marks follow your instructions.
