The Deep Drawn Aluminum Radar Housing is produced by Aunov Tech from aluminum, formed and finished under one roof. In duty, the drawn housing shields the assembly from dust, moisture and handling while locating it in place. Die work, machining and CMM inspection are all in-house, so repeat orders stay aligned with the approved sample without handing the part to another vendor.
Product overview
What matters most on this aluminium housing is, draw depth, wall band and the surfaces that forming cannot hold, audited against the approved sample at each production release.
Die building, pressing and machining for this aluminium housing are all in house, so feasibility questions are answered on the shop floor, with process data archived for repeat orders.
Production route
Production of this aluminium housing is locked to one route: Coil is blanked and drawn through progressive and single-stage dies; flanges and rims are formed in the same line, then trimmed to length.
The multi-dome cover plate tooling and setup record is stored against the part number, so nothing depends on someone remembering. First article, drawing revision and material cert travel with each multi-dome cover plate batch.
Materials and finishing
Materials kept on the floor cover cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze and this aluminium housing is costed in aluminium.
Because the part works in contact with media, the coating is chosen for cleanliness: polishing, zinc / nickel / chrome plating, anodising or powder coating. The finish on this aluminium housing is locked to the drawing revision, so later orders match.
Each shipment is verified against the master sample, with mill certificates filed per heat.
Quality control
An ISO 9001 certified system governs production: incoming material is verified against mill certificates, first articles are measured on a CMM, and run inspections follow an agreed sampling plan. The multi-dome cover plate first-article report carries cavity depth and seal face finish. If the assembly calls for torque, leak or pressure proof, the test is built into the quality plan, and the batch file carries the results.
Applications
This aluminium housing is used in electronic enclosures and power equipment under schedules that run for years at a time.
The same aluminium housing is often run in more than one assembly, so the specification is set by the toughest of them, without a second tooling round.
Customization and options
Options changed most often
Options customers tend to adapt on this aluminium housing: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and whether the first order is a prototype, a pilot lot or a production release.
Each quote for this aluminium housing states which variations are already tooled, so the cost of a change is visible before you commit. Revisions to the multi-dome cover plate drawing only take effect once approved.
Specifications
| Item | Deep Drawn Aluminum Radar Housing |
|---|---|
| Brand | AUNOV |
| Designing | The drawing is reviewed first; the agreed version then governs every batch. |
| Tooling | Tooling is built to the drawing and held against your part number for the life of the part. |
| Samples | Pre-production samples come with a full inspection report, so the sample is retained as the master, and production starts only after your written sign-off. |
| Materials | Carbon steel, 304 / 316 stainless, aluminium and brass are all held in stock; the final grade is fixed with the drawing review. |
| Surface finish | Finish selected from the drawing: plating, coating, anodising or passivation; the agreed finish travels with the part number. |
| Processing | Deep drawing from coil or blank, with in-process annealing so walls thin evenly; every stage is logged against your part number. |
| Equipment | Mechanical presses from 5 to 250 T and hydraulic presses 250-500 T, with in-line annealing furnaces; secondary ops run on CNC turning centres, inspection on the CMM. |
| Tolerance | +/-0.05 mm to +/-0.1 mm across the part, wall thickness held to print; dimensional reports accompany the first article. |
| Delivery terms | FOB, with DDP offered for EU and US addresses, T/T or L/C, with D/P accepted on repeat business; each volume tier carries its own quoted price. |
Packaging and delivery
Packaging protects the finished surfaces of this aluminium housing: interleaves, polybags or formed trays are selected according to the coating, in sealed export cartons, palletised and marked as you direct.
