This Custom Steel Metal Sheet Stamp Brass Deep Drawn Part is an Aunov Tech production part in brass or steel, quoted and built to customer print. In service, the deep drawn part carries the formed geometry the assembly needs at volume. Forming, machining and inspection share one floor, and a design change is re-sampled in one place without a second supplier involved.
Product overview
The critical features of this brass component are, the formed envelope, flatness and hole location, all held to the drawing and verified at first article.
Tooling and finishing for this brass component run under one roof, so revisions do not wait on outside suppliers, with process data archived for repeat orders.
How the part is produced
Production of this brass component is locked to one route: Blanks are drawn in stages, with interstage annealing where the wall thins; threads are single-pointed or rolled and seats bored in one setup where possible.
Each l-corner mounting bracket shipment is verified against the master sample before it leaves the shop. Mill certificates are filed per heat, so l-corner mounting bracket traceability survives a change of material batch.
Materials and finishing
Base materials in stock: cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze with H62 brass specified on the drawing for this brass component.
Finish selection follows the working environment: electrophoresis, powder coating, anodising and zinc / nickel plating. It is fixed on the drawing for this brass component, so repeat orders never reopen the question.
Repeat l-corner mounting bracket orders are measured against the approved sample, so neither material nor finish drifts between lots. Mill certificates are filed per heat, so l-corner mounting bracket traceability survives a change of material batch.
Quality control
An ISO 9001 certified system governs production: stock arrivals are checked against mill certificates, first-article geometry is confirmed on the CMM, and later batches follow the sampling plan agreed at approval. The l-corner mounting bracket first article goes on the CMM, with threads gauged to class. Torque, leak and pressure tests are available where the assembly needs them, with certificates included in the shipment file.
Where the part is used
This brass component normally works inside industrial machinery and equipment assemblies in both OEM and aftermarket supply.
A single design of this brass component is often reused across a product family, so a single grade and coating can cover each application, and the drawing stays common.
Customization and options
Where designs usually differ
Typical decisions customers make on this brass component: material grade, coating, wall bands, flange form and end closure, and the batch pattern – prototype, pilot lot or scheduled production.
Each quote for this brass component states which variations are already tooled, so new tooling is only quoted where it is genuinely required. Quantities and price breaks appear together on the l-corner mounting bracket quote.
Specifications
| Item | Custom Steel Metal Sheet Stamp Brass Deep Drawn Part |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – unusual walls, threads or tolerances are feasibility-checked first; the approved drawing is kept as the controlled master. |
| Tooling | Die design and toolmaking stay in house, so the die charge appears as its own quotation line, and ownership is confirmed on the quotation. |
| Samples | Sample parts are measured and reported before submission, so the approved first article becomes the gauge reference, and production starts only after your written sign-off. |
| Materials | Brass H62 / H65 in strip or bar, 0.8-4.0 mm nominal – the grade picked for machinability and plating adhesion. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; the finish is inspected with the dimensional report on the first article. |
| Processing | Stamping and forming in a progressive die with minimal secondary work; batch records are filed so a repeat order starts from approved data. |
| Equipment | 5-250 T presses running progressive and compound dies, backed by CNC turning centres and a climate-controlled inspection room. |
| Tolerance | +/-0.05 mm to +/-0.1 mm across the part; critical dimensions carry CMM data with the shipment. |
| Delivery terms | Freight is quoted to your door in FOB, CIF or DDP terms, payment by T/T or L/C. |
Packaging and delivery
The finish on this brass component dictates how it is packed: each coating gets its own packing – interleaves, bags or trays, in sealed cartons on export pallets, documented and marked to your instruction.
