Aunov Tech manufactures the Custom Design Metal Fabrication Stainless Steel Aluminum Deep Drawing in aluminum or stainless steel on a single production floor. In operation, the CNC machined part carries the controlled features that forming alone cannot hold. Drawing, cutting and measurement sit on one floor, and a design change is re-sampled in one place under one roof.
Product overview
The critical features of this stainless steel component are, material grade, wall uniformity and thread position, re-checked whenever the drawing is revised.
The press shop and machine shop that make this stainless steel component share one floor, so feasibility questions are answered on the shop floor, with process data archived for repeat orders.
Production route
Production follows a defined route: Blanks are drawn in stages, with interstage annealing where the wall thins; threads are single-pointed or rolled and seats bored in one setup where possible.
Route cards follow every order through the shop, so process settings are reused rather than re-invented.
Materials and finishing
Standard stock includes SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze with 304 / 316 stainless steel specified on the drawing for this stainless steel component.
The finish is chosen for the duty it will see: polishing, plating in zinc, nickel or chrome, anodising, powder coating, electrophoresis and passivation. It is fixed on the drawing for this stainless steel component, so repeat orders never reopen the question.
Production batches of the tab bracket are gauged back to the signed first article, not to a memory of it. Any change to the tab bracket drawing is re-approved and re-verified before production continues.
Quality control
An ISO 9001 certified system governs production: mill certificates cover every delivery of stock, first-article geometry is confirmed on the CMM, and later batches follow the sampling plan agreed at approval. The tab bracket first article is measured on the CMM and thread gauges confirm class. Torque, leak and pressure tests are available where the assembly needs them, with certificates included in the shipment file.
Applications
The stainless steel component is fitted into industrial and appliance assemblies under schedules that run for years at a time.
The same stainless steel component is often run in more than one assembly, so a single grade and coating can cover each application, and no re-tooling is needed.
Customization and options
The options customers tune most
Points customers normally tailor on this stainless steel component: grade and finish for the environment, wall thickness bands, flange and rim forms, threads, bosses and closed ends, and how the order is released – sample, pilot run or scheduled call-off.
The quote for this stainless steel component separates tooled options from new work, so the boundary between free and chargeable changes is explicit. Approved changes make the new tab bracket drawing the reference for production.
Specifications
| Item | Custom Design Metal Fabrication Stainless Steel Aluminum Deep Drawing |
|---|---|
| Brand | AUNOV |
| Designing | Quotation follows the print, not a catalogue – DFM notes are returned before any tooling is cut; the same drawing is used for every repeat order. |
| Tooling | The die is dedicated to your part and maintained on a recorded schedule. |
| Samples | Sample parts are measured and reported before submission, so the approved first article becomes the gauge reference, and the signed sample is kept for future reorders. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; mill certificates and heat numbers accompany the first article. |
| Surface finish | Plating, powder coating, anodising or polishing, per the print; masking and laser marking available where needed. |
| Processing | Coil-fed stamping, deburred and finished to the print; in-process checks sit between stages, not only at the end. |
| Equipment | Press shop with 5-250 T mechanical presses and dedicated dies, with in-house toolmaking to keep dies and fixtures maintained. |
| Tolerance | +/-0.03 mm on pierced holes, +/-0.1 mm on formed sections; capability is checked on the first article before the run continues. |
| Delivery terms | Order ships FOB unless you prefer DDP; payment by T/T or L/C, freight quoted to destination. |
Packaging and delivery
Packing for this stainless steel component is chosen around the coating: interleaving, bagging or tray packing is matched to the surface, in sealed cartons on export pallets; shipping documents and carton marks follow your instructions.
