Aunov Tech supplies the Precision Aluminum CNC Machined Plates and Frames as a aluminum component manufactured entirely in house. On the product, the CNC machined part delivers the precise turned or milled geometry the assembly mounts to. Die work, machining and CMM inspection are all in-house, so repeat orders stay aligned with the approved sample with no third party in the loop.
Product overview
This aluminium frame is defined by, the formed envelope, flatness and hole location, re-checked whenever the drawing is revised.
Tooling and finishing for this aluminium frame run under one roof, so the route from print to sample stays short, with the tooling history retained in house.
How it is manufactured
Production follows a defined route: The part is machined from bar or plate on CNC lathes and mills; cycle time and tool life are recorded per part number.
Each turned probes, pin shipment is verified against the master sample before it leaves the shop. Process settings for the turned probes, pin are archived, so later runs can be compared with the one you approved.
Materials and finishing
The standard stock list carries SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze and the grade agreed for this aluminium frame is aluminium.
Coating and polishing are matched to the end use: zinc, nickel or chrome plating, anodising, powder coating, electrophoresis and passivation. It is fixed on the drawing for this aluminium frame, so repeat orders never reopen the question.
The turned probes, pin tooling and setup record is stored against the part number, so nothing depends on someone remembering. First article, drawing revision and material cert travel with each turned probes, pin batch.
Quality control
An ISO 9001 certified system governs production: stock arrivals are checked against mill certificates, a full CMM report approves the first article, and later batches follow the sampling plan agreed at approval. First article of the turned probes, pin: CMM data on diameters, thread class confirmed by gauge. Where the application asks for it, torque, leak or pressure testing is added to the plan, and the batch file carries the results.
Typical applications
The aluminium frame is specified into industrial and appliance assemblies in both OEM and aftermarket supply.
The same aluminium frame is often run in more than one assembly, so wall bands and finishes are selected to cover the widest duty, and the die does not have to change.
Customization and options
What customers usually vary
The parts of the print for this aluminium frame that get adjusted: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and whether orders run as prototypes, pilot lots or scheduled batches.
Quotes for this aluminium frame show which options the current die already supports, so new tooling is only quoted where it is genuinely required. Changes to the turned probes, pin are made only under a written revision.
Specifications
| Item | Precision Aluminum CNC Machined Plates and Frames |
|---|---|
| Brand | AUNOV |
| Designing | Your drawing sets the part – a manufacturability review comes back with the quotation; the same drawing is used for every repeat order. |
| Tooling | Our toolroom covers die design, wire-cut EDM and maintenance, so no tooling step is outsourced, and ownership is confirmed on the quotation. |
| Samples | Samples are issued for approval before the run, so the approved first article becomes the gauge reference, and mass production is gated on that approval. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; mill certificates and heat numbers accompany the first article. |
| Surface finish | Zinc, nickel or chrome plating, anodising, passivation or e-coat; the agreed finish travels with the part number. |
| Processing | CNC turning from bar or billet, concentricity held across operations; first articles verify the whole flow before the run is released. |
| Equipment | CNC turning centres with bar feeders and 3-/4-axis machining centres, with CNC turning centres for secondary operations and CMM inspection. |
| Tolerance | +/-0.02 mm general machining, tighter on flagged dimensions; dimensional reports accompany the first article. |
| Delivery terms | FOB, CIF or DDP per Incoterms 2020, T/T with deposit and L/C for larger runs; call-off schedules are supported. |
Packing and shipment
The packing method protects the surfaces of this aluminium frame: interleaving, individual bags or trays are chosen by finish type, in sealed cartons on export pallets, documented and marked to your instruction.
