Aunov Tech supplies the Stainless Steel CNC Machined Thermowell Bodies as a stainless steel component manufactured entirely in house. In service, the CNC machined part delivers the precise turned or milled geometry the assembly mounts to. Forming and machining share equipment, staff and batch records, keeping first-article quality through scheduled runs without handing the part to another vendor.
Product overview
This stainless steel component is defined by, the draw ratio, corner radii and the faces that must stay flat, controlled from the approved first article onward.
The whole route from die to finished stainless steel component stays in house, so revisions do not wait on outside suppliers, and every step is logged against the part number.
How it is manufactured
Production follows a defined route: Machining starts from bar or plate and runs on CNC centres; threads are single-pointed or rolled and seats bored in one setup where possible.
Route cards follow each cross-drilled block, nipple batch through the shop, so the next run starts from the data that already worked. That record is what every cross-drilled block, nipple reorder is built on, so nothing changes silently between shipments.
Materials and finishing
Everything is drawn from a fixed stock list: carbon steel SPCC / DC01, 304 and 316 stainless, aluminium, brass and copper and this stainless steel component is costed in 304 / 316 stainless steel.
The surface treatment is picked to match the service conditions: polishing, plating in zinc, nickel or chrome, anodising, powder coating, electrophoresis and passivation. Once approved, the finish for this stainless steel component is fixed and does not get re-decided.
Route cards follow each cross-drilled block, nipple batch through the shop, so the next run starts from the data that already worked. That record is what every cross-drilled block, nipple reorder is built on, so nothing changes silently between shipments.
Quality control
Quality management is certified to ISO 9001: stock arrivals are checked against mill certificates, the first article is CMM-measured against the print, and every production run is inspected against the first-article report. First articles of the cross-drilled block, nipple are CMM measured, with threads gauged to class and diameters recorded. Functional testing – torque, leak or pressure – can be written into the plan, and the batch file carries the results.
Applications
The stainless steel component is fitted into industrial equipment and general assembly work in both OEM and aftermarket supply.
One drawing for this stainless steel component is commonly applied to several programmes, so the tightest tolerance in the family sets the spec, and the same first article applies throughout.
Customization and options
The options customers tune most
Points customers normally tailor on this stainless steel component: wall thickness bands, flange geometry, thread call-outs and the surface finish, and how the order is released – sample, pilot run or scheduled call-off.
The quotation for this stainless steel component marks what the existing tooling can do, so there are no surprise tooling charges after approval. Any change to the cross-drilled block, nipple requires a written revision first.
Specifications
| Item | Stainless Steel CNC Machined Thermowell Bodies |
|---|---|
| Brand | AUNOV |
| Designing | Send drawings, or send a sample to be measured – DFM notes are returned before any tooling is cut; the approved drawing is kept as the controlled master. |
| Tooling | Tooling is designed and built in house and held under your part number, so the die stays dedicated to your part. |
| Samples | Sample and first article are the same discipline here: measured, reported, then approved. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; grade and temper are confirmed in writing before tooling. |
| Surface finish | Finish selected from the drawing: plating, coating, anodising or passivation; masking and laser marking available where needed. |
| Processing | Turning, milling and drilling sequenced to minimise handling and re-chucking; every stage is logged against your part number. |
| Equipment | 12 CNC turning centres with automatic bar feeders; first articles and batch samples are checked on the CMM. |
| Tolerance | +/-0.02 mm general machining, tighter on flagged dimensions; critical dimensions carry CMM data with the shipment. |
| Delivery terms | CIF or DDP, with FOB available, T/T or L/C, with D/P accepted on repeat business; each volume tier carries its own quoted price. |
Packaging and delivery
The packing method protects the surfaces of this stainless steel component: interleaving, bagging or tray packing is matched to the surface, in sealed cartons on export pallets, with documents issued to your instructions.
