This Light Fabrication Deep Drawn Parts Metal Spinning Spun Parts Aluminum is an Aunov Tech production part in aluminum, quoted and built to customer print. Once installed, the CNC machined part carries the controlled features that forming alone cannot hold. Forming, machining and inspection share one floor, keeping first-article quality through scheduled runs under one roof.
Product overview
The drawing for this aluminium component fixes, the draw ratio, corner radii and the faces that must stay flat, re-checked whenever the drawing is revised.
Tooling and finishing for this aluminium component run under one roof, so a change of wall or hole does not restart the programme, with process data archived for repeat orders.
From coil to finished part
Production of this aluminium component is locked to one route: Drawing converts a flat blank into the finished envelope in one controlled sequence; threads are single-pointed or rolled and seats bored in one setup where possible.
The -plated square enclosure manufacturing record is archived together with the drawing revision that produced it. The approved -plated square enclosure sample governs later runs, and any grade change is agreed in writing first.
Materials and finishing
Base materials in stock: SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze with this aluminium component costed in aluminium.
The surface treatment is picked to match the service conditions: plating, anodising, powder coating, electrophoresis and passivation. It is written into the drawing for this aluminium component, so it cannot drift between batches.
Batch records for the -plated square enclosure are filed against the part number, so process settings are reused instead of re-invented. Deviations on the -plated square enclosure are reported before shipment rather than found on your assembly line.
Quality control and inspection
The plant is ISO 9001 certified: material traceability starts with mill certificates, the first article is CMM-measured against the print, and run inspections follow an agreed sampling plan. The -plated square enclosure first article is measured on the CMM and thread gauges confirm class. If the assembly calls for torque, leak or pressure proof, the test is built into the quality plan, and the batch file carries the results.
Applications
The aluminium component is fitted into lighting and luminaire assemblies in both OEM and aftermarket supply.
Drawings for this aluminium component are adapted across programmes, so one approved version covers the whole range, and no re-tooling is needed.
Customization and options
What customers usually vary
Options customers tend to adapt on this aluminium component: material grade, wall band, flange shape, thread size and finish for the working environment, with orders run as prototypes, pilot lots or scheduled call-offs.
The quotation for this aluminium component marks what the existing tooling can do, so the cost of a change is visible before you commit. The -plated square enclosure only changes against a written revision.
Specifications
| Item | Light Fabrication Deep Drawn Parts Metal Spinning Spun Parts Aluminum |
|---|---|
| Brand | AUNOV |
| Designing | Quotation follows the print, not a catalogue – a manufacturability review comes back with the quotation; the same drawing is used for every repeat order. |
| Tooling | Dies, fixtures and gauges are made in our own toolroom, so no tooling step is outsourced, and first-article timing is measured from the tooling start date. |
| Samples | Any sample deviation is corrected before the first production batch is released. |
| Materials | Stock runs to carbon steel, 304 / 316 stainless, aluminium and brass; the final grade is fixed with the drawing review. |
| Surface finish | Natural, plated or coated – the print decides, and the agreed finish is logged; finish thickness and adhesion checked on the first article. |
| Processing | Deep drawing from coil or blank, with in-process annealing so walls thin evenly; in-process checks sit between stages, not only at the end. |
| Equipment | Mechanical presses from 5 to 250 T and hydraulic presses 250-500 T, with in-line annealing furnaces, with CNC turning centres for secondary operations and CMM inspection. |
| Tolerance | +/-0.05 mm on formed features, with capability data on critical dimensions; capability is checked on the first article before the run continues. |
| Delivery terms | FOB Ningbo or Shanghai, payment by T/T, L/C at sight or D/P; each volume tier carries its own quoted price. |
Packaging and delivery
Finish comes first when packing this aluminium component: interleaving, individual bags or trays are chosen by finish type, then sealed cartons are palletised for export, with documents and marks to your instruction.
