The Stainless Steel temperature probe Stamping Parts BBQ cooking meat is produced by Aunov Tech from stainless steel, formed and finished under one roof. In the assembly, the deep drawn part replaces a machined-from-solid body with a lighter, faster drawn shell. Die work, machining and CMM inspection are all in-house, so first-article dimensions hold through volume batches without a second supplier involved.
Product overview
For this stainless steel probe, the drawing centres on, wall thinning, concentricity and the finished mating faces, checked by CMM at first article and by gauge in production.
Tooling and finishing for this stainless steel probe run under one roof, which keeps revision loops short and samples fast, and the same die can be re-cut from the original data.
How it is manufactured
The process for this stainless steel probe runs in a fixed sequence: Strip is fed through a progressive die that completes the profile; in-die tapping keeps hole position tight, then parts are tumbled and finished.
The open probe tubes, tooling and setup record is stored against the part number, so nothing depends on someone remembering. The signed open probe tubes, sample remains the reference and is kept with the job file.
Materials and surface finish
Standard stock includes carbon steel SPCC / DC01, 304 and 316 stainless, aluminium, brass and copper and this stainless steel probe is costed in 304 / 316 stainless steel.
Cleanliness drives the finish here: electrophoresis, powder coating, anodising and zinc / nickel plating. The agreed finish for this stainless steel probe travels with the part number on every reorder.
Repeat open probe tubes, orders are measured against the approved sample, so neither material nor finish drifts between lots. The signed open probe tubes, sample remains the reference and is kept with the job file.
Quality control
An ISO 9001 certified system governs production: stock arrivals are checked against mill certificates, the first article is CMM-measured against the print, and production batches are inspected on a sampling plan. The open probe tubes, first article is CMM measured – threads gauged to class, diameters on the record. Torque, leak and pressure tests are available where the assembly needs them, and the report is packed with the shipment.
Applications
The stainless steel probe is fitted into sensor and thermostat assemblies in both OEM and aftermarket supply.
A single design of this stainless steel probe is often reused across a product family, so one approved version covers the whole range, without a second tooling round.
Customization and options
Where this open probe tubes, family is usually customised
Points customers normally tailor on this stainless steel probe: wall thickness bands, flange geometry, thread call-outs and the surface finish, with orders run as prototypes, pilot lots or scheduled call-offs.
Options for this stainless steel probe already covered by the die are shown on the quote, so new tooling is only quoted where it is genuinely required. Tooling ownership for the open probe tubes, is part of the written quotation.
Specifications
| Item | Stainless Steel temperature probe Stamping Parts BBQ cooking meat |
|---|---|
| Brand | AUNOV |
| Designing | Made to your 2D/3D drawings (PDF, DWG, STEP, IGS) – unusual walls, threads or tolerances are feasibility-checked first; revisions are re-quoted once rather than silently absorbed. |
| Tooling | Dies, fixtures and gauges are made in our own toolroom, so the die charge appears as its own quotation line, and the charge is refundable against agreed volumes. |
| Samples | Pre-production samples come with a full inspection report, so the approved first article becomes the gauge reference, and mass production is gated on that approval. |
| Materials | Standard stock: carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass; the final grade is fixed with the drawing review. |
| Surface finish | Plating, coating or polishing to suit the drawing; masking and laser marking available where needed. |
| Processing | Precision tube drawing, cut to length and turned to the print; in-process checks sit between stages, not only at the end. |
| Equipment | Progressive presses 25-200 T, decoilers and coil feeders, vibratory finishing lines and a full in-house toolroom. |
| Tolerance | +/-0.02 mm on turned diameters, wall held to the agreed band; capability is checked on the first article before the run continues. |
| Delivery terms | Freight is quoted to your door in FOB, CIF or DDP terms, payment by T/T or L/C. |
Packaging and delivery
This stainless steel probe is packed to protect the finish: the coating decides whether parts are interleaved, bagged or tray-packed, in sealed cartons on export pallets, documented and marked to your instruction.
