Produced in stainless steel by Aunov Tech, the Professional Deep Drawn Metal Stamping Small Pipe Parts is formed and machined on the same floor. In operation, the deep drawn tube guides or contains the mating part along its bore. Die work, machining and CMM inspection are all in-house, so the approved sample defines every later batch with no third party in the loop.
Product overview
This metal component is defined by, the forming route, the tolerance band and the sealing faces, checked by CMM at first article and by gauge in production.
Toolroom, presses and machining centres used on this metal component operate on the same site, which keeps revision loops short and samples fast, and the die record stays with your part number.
How the part is produced
This is how the metal component is built: Blanks are drawn in stages, with interstage annealing where the wall thins; flanges and rims are formed in the same line, then trimmed to length.
The small tube sleeves, tooling and setup record is stored against the part number, so nothing depends on someone remembering. The approved small tube sleeves, sample governs later runs, and any grade change is agreed in writing first.
Materials and finishing
Materials kept on the floor cover cold-rolled steel (SPCC / DC01), 304 / 316 stainless, aluminium, brass, copper and bronze and this metal component is costed in carbon steel or stainless.
The finish is chosen for the duty it will see: zinc and nickel plating, chrome, anodising, powder coating and passivation. Once approved, the finish for this metal component is fixed and does not get re-decided.
Every small tube sleeves, order keeps its trace back to the approved first article, and a reorder is a repeat rather than a new start. Mill certificates are filed per heat, so small tube sleeves, traceability survives a change of material batch.
Quality control
Quality management is certified to ISO 9001: stock arrivals are checked against mill certificates, a full CMM report approves the first article, and every production run is inspected against the first-article report. Wall thickness on the small tube sleeves, is checked at first article, not assumed. If the assembly calls for torque, leak or pressure proof, the test is built into the quality plan, and the inspection report ships with each batch.
Where the part is used
The metal component is fitted into industrial machinery and equipment assemblies for customers who buy to drawing.
The same metal component is used across several platforms, so a single grade and coating can cover each application, without a second tooling round.
Options and variations
Where this small tube sleeves, family is usually customised
The usual variables are material and finish for the service environment, closed or open ends, wall bands, inside finish ranges, flanges and port features added by secondary ops, and volume – from validation prototypes to scheduled call-off batches.
Changes are quoted with their tooling impact stated explicitly, so nothing hidden appears later in the project.
Specifications
| Item | Professional Deep Drawn Metal Stamping Small Pipe Parts |
|---|---|
| Brand | AUNOV |
| Designing | Driven by your drawing or a physical sample – samples are reverse-measured into a controlled drawing; changes are priced before they are made. |
| Tooling | Tooling is built and held under your part number, so no tooling step is outsourced, and the charge is refundable against agreed volumes. |
| Samples | Samples are issued for approval before the run, so the sample is retained as the master, and production starts only after your written sign-off. |
| Materials | Materials held include carbon steel, 304 / 316 stainless, aluminium and brass; special grades are sourced to the drawing when volumes justify. |
| Surface finish | Finish selected from the drawing: plating, coating, anodising or passivation; alternatives quoted with the quotation, samples approved in writing. |
| Processing | Deep drawing on maintained presses, blank size and lubrication logged per run; batch records are filed so a repeat order starts from approved data. |
| Equipment | Mechanical presses from 5 to 250 T and hydraulic presses 250-500 T, with in-line annealing furnaces, with in-house toolmaking to keep dies and fixtures maintained. |
| Tolerance | +/-0.05 mm on drawn diameters, tighter bands confirmed against the drawing; dimensional reports accompany the first article. |
| Delivery terms | Freight, Incoterm and payment term are confirmed on the order: FOB, CIF or DDP, T/T or L/C. |
Packaging and delivery
Packing for this metal component is chosen around the coating: interleaves, bags or trays are matched to the surface treatment, then sealed cartons are palletised for export, with documents and marks to your instruction.
