Aunov Tech builds this Sheet Metal Deep Drawn Stamped Mold Press Forming Metal Stamping in stainless steel, from coil or bar through to the finished surfaces. In the assembly, the deep drawn part combines forming and machining to reach the print on every controlled face. Forming, machining and inspection share one floor, so the approved sample defines every later batch under one roof.
Product overview
For this metal component, the drawing centres on, wall thinning, concentricity and the finished mating faces, controlled from the approved first article onward.
The press shop and machine shop that make this metal component share one floor, so revisions do not wait on outside suppliers, and nothing about the route depends on a third party.
How the part is produced
The process for this metal component runs in a fixed sequence: Coil is blanked and drawn through progressive and single-stage dies; secondary machining holds the seats, threads and faces that forming cannot produce.
Route cards follow every order through the shop, so process settings are reused rather than re-invented.
Materials and finishing
The standard stock list carries SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze and this metal component runs in carbon steel or stainless.
Finish selection follows the working environment: electrophoresis, powder coating, anodising and zinc / nickel plating. Once approved, the finish for this metal component is fixed and does not get re-decided.
The approved sample governs later runs, so the colour and grain of the finish stay stable.
Quality control
The plant is ISO 9001 certified: stock arrivals are checked against mill certificates, first-article geometry is confirmed on the CMM, and run inspections follow an agreed sampling plan. CMM first-article measurement of the bracket covers diameters and gauges thread class. Functional testing – torque, leak or pressure – can be written into the plan, with certificates included in the shipment file.
Where the part is used
This metal component normally works inside industrial equipment and general assembly work under schedules that run for years at a time.
The same metal component is used across several platforms, so a single grade and coating can cover each application, and the same first article applies throughout.
Customization and options
Frequently varied options
The options most often changed on this metal component: coating, wall bands, flange profiles, threads and the degree of closure on the ends, and whether the programme starts as a sample or a full release.
The quotation for this metal component is explicit about what the die already covers, so you can see which options are free and which need new tooling. A written revision is required before any bracket change is actioned.
Specifications
| Item | Sheet Metal Deep Drawn Stamped Mold Press Forming Metal Stamping |
|---|---|
| Brand | AUNOV |
| Designing | Send drawings, or send a sample to be measured – DFM notes are returned before any tooling is cut; the approved drawing is kept as the controlled master. |
| Tooling | Progressive and drawing dies are designed and built in house, so a die can be re-cut against the approved drawing, and first-article timing is measured from the tooling start date. |
| Samples | Sample and first article are the same discipline here: measured, reported, then approved. |
| Materials | Materials held include carbon steel, 304 / 316 stainless, aluminium and brass; grade and temper are confirmed in writing before tooling. |
| Surface finish | Plating, coating or polishing to suit the drawing; masking and laser marking available where needed. |
| Processing | Progressive die stamping, trimmed and formed in one pass; first articles verify the whole flow before the run is released. |
| Equipment | Press shop with 5-250 T mechanical presses and dedicated dies, backed by CNC turning centres and a climate-controlled inspection room. |
| Tolerance | +/-0.05 mm on formed features, +/-0.1 mm on overall length; critical dimensions carry CMM data with the shipment. |
| Delivery terms | CIF or DDP, with FOB available, T/T with deposit and L/C for larger runs; each volume tier carries its own quoted price. |
Packaging and delivery
The finish on this metal component dictates how it is packed: interleaves, polybags or formed trays are selected according to the coating, then sealed cartons are palletised for export, with documents and marks to your instruction.
