Produced in stainless steel by Aunov Tech, the Custom CNC Machined Plastic and Nylon Components is formed and machined on the same floor. In duty, the CNC machined part delivers the precise turned or milled geometry the assembly mounts to. Die work, machining and CMM inspection are all in-house, which keeps tolerances consistent from sample to volume on one production route.
Product overview
The critical features of this metal component are, material grade, wall uniformity and thread position, checked by CMM at first article and by gauge in production.
Die work and machining for this metal component sit on the same floor, so revisions do not wait on outside suppliers, with the tooling history retained in house.
Production route
This is how the metal component is built: Machining starts from bar or plate and runs on CNC centres; threads are single-pointed or rolled and seats bored in one setup where possible.
Every order keeps its trace back to the approved first article, so process settings are reused rather than re-invented.
Materials and finishing
Working stock covers SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze with carbon steel or stainless specified on the drawing for this metal component.
Finish selection follows the working environment: polishing, zinc / nickel / chrome plating, anodising or powder coating. The agreed finish for this metal component travels with the part number on every reorder.
Repeat die-cast housing component orders are measured against the approved sample, so neither material nor finish drifts between lots. The signed die-cast housing component sample remains the reference and is kept with the job file.
Quality control
The factory operates with ISO 9001 certification: mill certificates cover every delivery of stock, the first article is CMM-measured against the print, and production batches are inspected on a sampling plan. CMM first-article measurement of the die-cast housing component covers diameters and gauges thread class. Functional testing – torque, leak or pressure – can be written into the plan, and the batch file carries the results.
Applications
This metal component normally works inside industrial machinery and equipment assemblies in both OEM and aftermarket supply.
The same metal component is used across several platforms, so the finish is chosen to cover the harshest of them, and the drawing stays common.
Customization and options
Options changed most often
Options customers tend to adapt on this metal component: material grade, coating, wall bands, flange form and end closure, and how the order is released – sample, pilot run or scheduled call-off.
Options for this metal component already covered by the die are shown on the quote, so you can see which options are free and which need new tooling. The die-cast housing component is frozen against the current revision until a written change is raised.
Specifications
| Item | Custom CNC Machined Plastic and Nylon Components |
|---|---|
| Brand | AUNOV |
| Designing | Files reviewed in PDF, DWG, STEP or IGS; the signed-off revision is the reference for production. |
| Tooling | Progressive and drawing dies are designed and built in house, so die cost stays transparent, and maintenance is tracked against the part number. |
| Samples | Pre-production samples come with a full inspection report, so the approved first article becomes the gauge reference, and mass production is gated on that approval. |
| Materials | Stock covers carbon steel (SPCC / DC01), 304 / 316 stainless, aluminium and brass; grade and temper are confirmed in writing before tooling. |
| Surface finish | Natural, plated or coated – the print decides, and the agreed finish is logged; masking and laser marking available where needed. |
| Processing | CNC turning from bar or billet, concentricity held across operations; first articles verify the whole flow before the run is released. |
| Equipment | Bar-fed CNC turning centres plus 3- and 4-axis machining centres, with CNC turning centres for secondary operations and CMM inspection. |
| Tolerance | +/-0.01 mm on turned and milled features; dimensional reports accompany the first article. |
| Delivery terms | CIF or DDP, with FOB available, T/T with deposit and L/C for larger runs; repeat orders reuse the approved first article. |
Packaging and delivery
The packing method protects the surfaces of this metal component: interleaving, individual bags or trays are chosen by finish type, in sealed export cartons, palletised and marked as you direct.
