The Custom Deep Drawn Stamping Parts Sheet Metal Fabrication is produced by Aunov Tech from stainless steel, formed and finished under one roof. In duty, the deep drawn part replaces a machined-from-solid body with a lighter, faster drawn shell. Forming and machining share equipment, staff and batch records, keeping first-article quality through scheduled runs without a second supplier involved.
Product overview
What matters most on this metal component is, wall thinning, concentricity and the finished mating faces, all held to the drawing and verified at first article.
Forming, machining and finishing for this metal component happen on one site, so a drawing change is absorbed in one step, and the approved sample is kept as the master.
How it is manufactured
The process for this metal component runs in a fixed sequence: Coil is blanked and then drawn down in successive stages; wall thickness is checked at the thinnest section after forming.
The z mounting bracket manufacturing record is archived together with the drawing revision that produced it. Mill certificates are filed per heat, so z mounting bracket traceability survives a change of material batch.
Materials and finishing
The standard stock list carries SPCC / DC01 carbon steel, 304 / 316 stainless, aluminium, brass, copper and bronze and this metal component is costed in carbon steel or stainless.
The finish is chosen for the duty it will see: polishing, zinc / nickel / chrome plating, anodising or powder coating. The agreed finish for this metal component travels with the part number on every reorder.
Production is compared with the approved sample every run, so neither material nor finish drifts between lots.
Quality control and inspection
Quality management is certified to ISO 9001: certificates verify each incoming batch of material, first-article geometry is confirmed on the CMM, and production batches are inspected on a sampling plan. First articles of the z mounting bracket are CMM measured, with threads gauged to class and diameters recorded. If the assembly calls for torque, leak or pressure proof, the test is built into the quality plan, and results travel with the batch paperwork.
Applications
The metal component sits in industrial equipment and general assembly work for OEM and Tier-1 customers.
One part number for this metal component frequently serves several assemblies, so a single grade and coating can cover each application, and approvals carry across programmes.
Customization and options
Where designs usually differ
The parts of the print for this metal component that get adjusted: wall thickness bands, flange geometry, thread call-outs and the surface finish, and the batch pattern – prototype, pilot lot or scheduled production.
Options for this metal component already covered by the die are shown on the quote, so the cost of a change is visible before you commit. For the z mounting bracket, tooling terms live in the quote – nothing is left implied.
Specifications
| Item | Custom Deep Drawn Stamping Parts Sheet Metal Fabrication |
|---|---|
| Brand | AUNOV |
| Designing | Quotation follows the print, not a catalogue – samples are reverse-measured into a controlled drawing; changes are priced before they are made. |
| Tooling | Progressive and drawing dies are designed and built in house, so the die charge appears as its own quotation line, and ownership is confirmed on the quotation. |
| Samples | Sample lead time is quoted with the order, and the approved sample governs the run. |
| Materials | Carbon steel, 304 / 316 stainless, aluminium and brass are all held in stock; material substitutes are proposed only with your written approval. |
| Surface finish | Surface treatment matched to the duty: plating, coating or polishing; finish thickness and adhesion checked on the first article. |
| Processing | Stamping and forming in a progressive die with minimal secondary work; batch records are filed so a repeat order starts from approved data. |
| Equipment | 5-250 T presses running progressive and compound dies, with CNC turning centres for secondary operations and CMM inspection. |
| Tolerance | +/-0.05 mm to +/-0.1 mm across the part; capability is checked on the first article before the run continues. |
| Delivery terms | Shipping terms are set with the order: FOB, CIF or DDP, T/T or L/C, door delivery quoted. |
Packaging and delivery
The packing method protects the surfaces of this metal component: interleaving, individual bags or trays are chosen by finish type, then sealed cartons are palletised for export, with documents and marks to your instruction.
